Subject: Re: Re: Audio available when menu 9 set to PC?
Newsgroups: gmane.recreation.radio.hardware.kenwood.th-f7e
Date: 2008-03-18 06:13:00 GMT (15 weeks, 4 days, 17 hours and 11 minutes ago)
Steve wrote: > RE: >>>> Can I use the same setup when menu 9 is set to TNC/9600bps? That >> way I get audio directly off the discriminator. >> .... snip.... > >>> AND >>> While I've never tried it, I believe the computer commands won't >>> work in TNC mode; only in PC Mode. > > > I was pretty sure, but I just checked the manual. PC control in the > 9600 mode can't work because the Tx & Rx serial lines change to DCD > and PTT in 9600 mode. That was what I also found out when combining the PC control and speaker/mic schematics from the manual. But that is fine for normal use. > P.S. If you have Excel, my spreadsheet for control and memory > management, that is in the Files Area, is my most sophisticated version. I'll also have a look at that, thanks. -- Robert Elsinga =www.elsinga.net ------------------------------------