Subject: Re: Audio available when menu 9 set to PC?
Newsgroups: gmane.recreation.radio.hardware.kenwood.th-f7e
Date: 2008-03-17 06:51:54 GMT (15 weeks, 5 days, 18 hours and 19 minutes ago)
> > I's like to hook my (soon to arrive) TH-F7E up to a computer, > > controling it from the screen. I'd like to connect audio out to my > > computer's Line In and the audio in to a boom mic. > > Can I use the same setup when menu 9 is set to TNC/9600bps? That way I > > get audio directly off the discriminator. > in my MSG 433: > The Rx audio and Tx audio are live when the radio is in PC mode. > You can build an adapter to plug into the radio and then plug the > PG-4y (programming) cable into it along with a speaker and electret Mic. Okay. > The pinouts are in the manual. Also in the FILES area is a doc with > the pinouts. Look for my call - Protocol doc. Already found the protocol doc, which is very nice. => New info added: > The audio which is live in PC mode is the normal Mic and speaker > [appropriately pre/de-emphasized]. > AND > While I've never tried it, I believe the computer commands won't > work in TNC mode; only in PC Mode. Thanks! Off to warm up the soldering iron. =