--- In ken_th-f7e <at> yahoogroups.com, "Robert Elsinga = " <robert@...>
wrote:
>
> Hi!
>
> I's like to hook my (soon to arrive) TH-F7E up to a computer,
> controling it from the screen. I'd like to connect audio out to my
> computer's Line In and the audio in to a boom mic.
>
> But the manual doesn't show audio being available when setting menu 9
> to PC. I did found a message on the internet that is was available.
>
> Can anyone clarify on this matter?
>
> Can I use the same setup when menu 9 is set to TNC/9600bps? That way I
> get audio directly off the discriminator.
>
> Robert =
>
Robert,
in my MSG 433:
The Rx audio and Tx audio are live when the radio is in PC mode.
You can build an adapter to plug into the radio and then plug the
PG-4y (programming) cable into it along with a speaker and electret Mic.
The pinouts are in the manual. Also in the FILES area is a doc with
the pinouts. Look for my call - Protocol doc.
73, Steve, K9DCI
New info added:
The audio which is live in PC mode is the normal Mic and speaker
[appropriately pre/de-emphasized].
AND
While I've never tried it, I believe the computer commands won't
work in TNC mode; only in PC Mode.
73, Steve, K9DCI
------------------------------------
| 
