Home
Reading
Searching
Subscribe
Sponsors
Statistics
Posting
Contact
Spam
Lists
Links
About
Hosting
Filtering
Features Download
Marketing
Archives
FAQ
Blog
 
Gmane
From: othermark <atkin901 <at> yahoo.com>
Subject: acpi on msi-9218 (-current) swaps sio0 and sio1
Newsgroups: gmane.os.freebsd.devel.acpi
Date: Thursday 29th June 2006 21:51:34 UTC (over 11 years ago)
With acpi loaded on a msi-9218 motherboard, I'm seeing sio0 and sio1
get 'swapped.'  Even though the kernel is compiled for console on 0x3f8,
I've had to change the /etc/ttys to use ttyd1 so login is displayed when
the system is booted.   

Empirically, this tells me that 0x3f8 is correct for sio0 (since the kernel
and boot loader display fine using it as comconsole).   

Is there a way to force this to be consistant?   This is -current from Jun
8.  I will try a more recent kernel soon.   The following is a verbose boot
log.  


Note that the LCD driver tries to use cuad0 since the console is using
ttyd1
(cuad0) after bootup.  However, since the kernel output has
ttyd0/sio0/cuad0 tied up, it fails to attach.  It will attach later after
bootup, but not work.

Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 7.0-CURRENT #1: Thu Jun  8 08:11:00 PDT 2006
    root@pogo-1.f5test.net:/usr/obj/usr/src/sys/POGO
WARNING: WITNESS option enabled, expect reduced performance.
Using 32 colors for the VM-PQ tuning (1024, 8)
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0cdb000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0cdb1a8.
MP Configuration Table version 1.4 found at 0xc009fda1
Table 'FACP' at 0x3fe9cda9
Table 'ASF!' at 0x3fe9ce1d
Table 'SPCR' at 0x3fe9cee4
Table 'MCFG' at 0x3fe9cf34
Table 'APIC' at 0x3fe9cf70
MADT: Found table at 0x3fe9cf70
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 0: enabled
SMP: Added CPU 0 (AP)
MADT: Found CPU APIC ID 1 ACPI ID 1: enabled
SMP: Added CPU 1 (AP)
INTR: Adding local APIC 0 as a target
ACPI APIC Table: 
Calibrating clock(s) ... i8254 clock: 1193219 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 3192019656 Hz
CPU: Intel(R) Pentium(R) D CPU 3.20GHz (3192.02-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf44  Stepping = 4
 
Features=0xbfebfbff
  Features2=0x649d
  AMD Features=0x20100000
  Cores per package: 2

Instruction TLB: 4 KB, 2 MB or 4 MB pages, fully associative, 128 entries
Data TLB: 4 KB or 4 MB pages, fully associative, 64 entries
1st-level data cache: 16 KB, 8-way set associative, sectored cache, 64 byte
line size
Trace cache: 12K-uops, 8-way set associative
2nd-level cache: 1 MB, 8-way set associative, sectored cache, 64 byte line
size
L2 cache: 1024 kbytes, 8-way associative, 64 bytes/line
real memory  = 1072234496 (1022 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000001028000 - 0x000000003ec55fff, 1036181504 bytes (252974 pages)
avail memory = 1035837440 (987 MB)
INTR: Adding local APIC 1 as a target
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
bios32: Found BIOS32 Service Directory header at 0xc00f60f0
bios32: Entry = 0xfd450 (c00fd450)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0xfd450+0x34c
pnpbios: Found PnP BIOS data at 0xc00f6180
pnpbios: Entry = f0000:a9fa  Rev = 1.0
Other BIOS signatures found:
APIC: CPU 0 has ACPI ID 0
APIC: CPU 1 has ACPI ID 1
MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
ioapic0: intpin 0 -> ExtINT (edge, high)
ioapic0: intpin 1 -> ISA IRQ 1 (edge, high)
ioapic0: intpin 2 -> ISA IRQ 2 (edge, high)
ioapic0: intpin 3 -> ISA IRQ 3 (edge, high)
ioapic0: intpin 4 -> ISA IRQ 4 (edge, high)
ioapic0: intpin 5 -> ISA IRQ 5 (edge, high)
ioapic0: intpin 6 -> ISA IRQ 6 (edge, high)
ioapic0: intpin 7 -> ISA IRQ 7 (edge, high)
ioapic0: intpin 8 -> ISA IRQ 8 (edge, high)
ioapic0: intpin 9 -> ISA IRQ 9 (edge, high)
ioapic0: intpin 10 -> ISA IRQ 10 (edge, high)
ioapic0: intpin 11 -> ISA IRQ 11 (edge, high)
ioapic0: intpin 12 -> ISA IRQ 12 (edge, high)
ioapic0: intpin 13 -> ISA IRQ 13 (edge, high)
ioapic0: intpin 14 -> ISA IRQ 14 (edge, high)
ioapic0: intpin 15 -> ISA IRQ 15 (edge, high)
ioapic0: intpin 16 -> PCI IRQ 16 (level, low)
ioapic0: intpin 17 -> PCI IRQ 17 (level, low)
ioapic0: intpin 18 -> PCI IRQ 18 (level, low)
ioapic0: intpin 19 -> PCI IRQ 19 (level, low)
ioapic0: intpin 20 -> PCI IRQ 20 (level, low)
ioapic0: intpin 21 -> PCI IRQ 21 (level, low)
ioapic0: intpin 22 -> PCI IRQ 22 (level, low)
ioapic0: intpin 23 -> PCI IRQ 23 (level, low)
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
ioapic0: intpin 2 trigger: edge
ioapic0: intpin 2 polarity: high
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0: intpin 9 polarity: high
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: high
lapic1: Routing NMI -> LINT1
lapic1: LINT1 trigger: edge
lapic1: LINT1 polarity: high
ioapic0  irqs 0-23 on motherboard
cpu0 BSP:
     ID: 0x00000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000100ef therm: 0x00000200 err: 0x00010000 pcm: 0x00010000
wlan: <802.11 Link Layer>
ath_rate: version 1.2 
null: 
random: 
nfslock: pseudo-device
io: 
kbd: new array size 4
kbd1 at kbdmux0
mem: 
Pentium Pro MTRR support enabled
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
rr232x: RocketRAID 232x controller driver v1.02 (Jun  8 2006 08:10:46)
npx0: INT 16 interface
acpi0:  on motherboard
ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48
acpi0: [MPSAFE]
pci_open(1):    mode 1 addr port (0x0cf8) is 0x8000fa20
pci_open(1a):   mode1res=0x80000000 (0x80000000)
pci_cfgcheck:   device 0 [class=060000] [hdr=00] is there (id=27788086)
pcibios: BIOS version 2.10
AcpiOsDerivePciId: bus 0 dev 31 func 0
AcpiOsDerivePciId: bus 0 dev 31 func 0
AcpiOsDerivePciId: bus 0 dev 31 func 0
acpi0: Power Button (fixed)
AcpiOsDerivePciId: bus 0 dev 0 func 0
AcpiOsDerivePciId: bus 0 dev 31 func 0
AcpiOsDerivePciId: bus 0 dev 31 func 0
ACPI timer: 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
pci_link0: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0   10   N     0  3 10 11 14 15
pci_link0: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0   10   N     0  3 10 11 14 15
pci_link0: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 10 11 14 15
pci_link1: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0   12   N     0  3 10 11 14 15
pci_link1: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 10 11 14 15
pci_link1: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 10 11 14 15
pci_link2: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0   11   N     0  3 10 11 14 15
pci_link2: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0   11   N     0  3 10 11 14 15
pci_link2: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 10 11 14 15
pci_link3: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0   10   N     0  3 10 11 14 15
pci_link3: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0   10   N     0  3 10 11 14 15
pci_link3: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 10 11 14 15
pci_link4: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 10 11 14 15
pci_link4: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 10 11 14 15
pci_link4: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 10 11 14 15
pci_link5: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 10 11 14 15
pci_link5: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 10 11 14 15
pci_link5: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 10 11 14 15
pci_link6: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 10 11 14 15
pci_link6: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 10 11 14 15
pci_link6: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 10 11 14 15
pci_link7: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0    5   N     0  3 10 11 14 15
pci_link7: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 10 11 14 15
pci_link7: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 10 11 14 15
cpu0:  on acpi0
acpi_perf0:  on cpu0
acpi_perf0: failed in PERF_STATUS attach
device_attach: acpi_perf0 attach returned 6
acpi_perf0:  on cpu0
acpi_perf0: failed in PERF_STATUS attach
device_attach: acpi_perf0 attach returned 6
acpi_throttle0:  on cpu0
acpi_throttle0: P_CNT from P_BLK 0x1010
cpu1:  on acpi0
acpi_throttle1:  on cpu1
acpi_throttle1: failed to attach P_CNT
device_attach: acpi_throttle1 attach returned 6
pcib0:  port 0xcf8-0xcff on acpi0
pci0:  on pcib0
pci0: physical bus=0
found-> vendor=0x8086, dev=0x2778, revid=0x81
        bus=0, slot=0, func=0
        class=06-00-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0106, statreg=0x2090, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2779, revid=0x81
        bus=0, slot=1, func=0
        class=06-04-00, hdrtype=0x01, mfdev=0
        cmdreg=0x0100, statreg=0x0010, cachelnsz=8 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=10
pcib0: matched entry for 0.1.INTA
pcib0: slot 1 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x27d0, revid=0x01
        bus=0, slot=28, func=0
        class=06-04-00, hdrtype=0x01, mfdev=1
        cmdreg=0x0000, statreg=0x0010, cachelnsz=8 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=12
pcib0: matched entry for 0.28.INTA
pcib0: slot 28 INTA hardwired to IRQ 17
found-> vendor=0x8086, dev=0x27e0, revid=0x01
        bus=0, slot=28, func=4
        class=06-04-00, hdrtype=0x01, mfdev=1
        cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=12
pcib0: matched entry for 0.28.INTA
pcib0: slot 28 INTA hardwired to IRQ 17
found-> vendor=0x8086, dev=0x27e2, revid=0x01
        bus=0, slot=28, func=5
        class=06-04-00, hdrtype=0x01, mfdev=1
        cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
        intpin=b, irq=11
pcib0: matched entry for 0.28.INTB
pcib0: slot 28 INTB hardwired to IRQ 16
found-> vendor=0x8086, dev=0x27c8, revid=0x01
        bus=0, slot=29, func=0
        class=0c-03-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=5
        map[20]: type 4, range 32, base 00003000, size  5, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 23
found-> vendor=0x8086, dev=0x27c9, revid=0x01
        bus=0, slot=29, func=1
        class=0c-03-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=b, irq=10
        map[20]: type 4, range 32, base 00003020, size  5, enabled
pcib0: matched entry for 0.29.INTB
pcib0: slot 29 INTB hardwired to IRQ 19
found-> vendor=0x8086, dev=0x27ca, revid=0x01
        bus=0, slot=29, func=2
        class=0c-03-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=c, irq=11
        map[20]: type 4, range 32, base 00003040, size  5, enabled
pcib0: matched entry for 0.29.INTC
pcib0: slot 29 INTC hardwired to IRQ 18
found-> vendor=0x8086, dev=0x27cb, revid=0x01
        bus=0, slot=29, func=3
        class=0c-03-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=d, irq=10
        map[20]: type 4, range 32, base 00003060, size  5, enabled
pcib0: matched entry for 0.29.INTD
pcib0: slot 29 INTD hardwired to IRQ 16
found-> vendor=0x8086, dev=0x27cc, revid=0x01
        bus=0, slot=29, func=7
        class=0c-03-20, hdrtype=0x00, mfdev=0
        cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=5
        powerspec 2  supports D0 D3  current D0
        map[10]: type 1, range 32, base d8500000, size 10, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 23
found-> vendor=0x8086, dev=0x244e, revid=0xe1
        bus=0, slot=30, func=0
        class=06-04-01, hdrtype=0x01, mfdev=0
        cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x27b8, revid=0x01
        bus=0, slot=31, func=0
        class=06-01-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x27df, revid=0x01
        bus=0, slot=31, func=1
        class=01-01-8a, hdrtype=0x00, mfdev=0
        cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=255
        map[20]: type 4, range 32, base 000030a0, size  4, enabled
found-> vendor=0x8086, dev=0x27c0, revid=0x01
        bus=0, slot=31, func=2
        class=01-01-8f, hdrtype=0x00, mfdev=0
        cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=b, irq=10
        powerspec 2  supports D0 D3  current D0
        map[10]: type 4, range 32, base 000030e8, size  3, enabled
        map[14]: type 4, range 32, base 000030dc, size  2, enabled
        map[18]: type 4, range 32, base 000030e0, size  3, enabled
        map[1c]: type 4, range 32, base 000030d8, size  2, enabled
        map[20]: type 4, range 32, base 000030b0, size  4, enabled
        map[24]: type 1, range 32, base d8500400, size 10, enabled
pcib0: matched entry for 0.31.INTB
pcib0: slot 31 INTB hardwired to IRQ 19
found-> vendor=0x8086, dev=0x27da, revid=0x01
        bus=0, slot=31, func=3
        class=0c-05-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0101, statreg=0x0280, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=b, irq=10
        map[20]: type 4, range 32, base 00001100, size  5, enabled
pcib0: matched entry for 0.31.INTB
pcib0: slot 31 INTB hardwired to IRQ 19
pcib1:  irq 16 at device 1.0 on pci0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   I/O decode        0x0-0x0
pcib1:   memory decode     0x0-0x0
pcib1:   prefetched decode 0x0-0x0
pci1:  on pcib1
pci1: physical bus=1
pcib2:  irq 17 at device 28.0 on pci0
pcib2:   secondary bus     2
pcib2:   subordinate bus   2
pcib2:   I/O decode        0x0-0x0
pcib2:   memory decode     0x0-0x0
pcib2:   prefetched decode 0x0-0x0
pci2:  on pcib2
pci2: physical bus=2
pcib3:  irq 17 at device 28.4 on pci0
pcib3:   secondary bus     3
pcib3:   subordinate bus   3
pcib3:   I/O decode        0x4000-0x4fff
pcib3:   memory decode     0xd8000000-0xd80fffff
pcib3:   prefetched decode 0xfff00000-0xfffff
pci3:  on pcib3
pci3: physical bus=3
found-> vendor=0x8086, dev=0x108b, revid=0x03
        bus=3, slot=0, func=0
        class=02-00-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=10
        powerspec 2  supports D0 D3  current D0
        MSI supports 1 message, 64 bit
        map[10]: type 1, range 32, base d8000000, size 17, enabled
pcib3: (null) requested memory range 0xd8000000-0xd801ffff: good
        map[18]: type 4, range 32, base 00004000, size  5, enabled
pcib3: (null) requested I/O range 0x4000-0x401f: in range
pcib3: matched entry for 3.0.INTA
pcib3: slot 0 INTA hardwired to IRQ 16
em0:  port
0x4000-0x401f mem 0xd8000000-0xd801ffff irq 16 at device 0.0 on pci3
em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xd8000000
em0: Reserved 0x20 bytes for rid 0x18 type 4 at 0x4000
em0: bpf attached
em0: Ethernet address: 00:13:d3:fe:05:8e
ioapic0: routing intpin 16 (PCI IRQ 16) to vector 49
em0: [FAST]
pcib4:  irq 16 at device 28.5 on pci0
pcib4:   secondary bus     4
pcib4:   subordinate bus   4
pcib4:   I/O decode        0x5000-0x5fff
pcib4:   memory decode     0xd8100000-0xd81fffff
pcib4:   prefetched decode 0xfff00000-0xfffff
pci4:  on pcib4
pci4: physical bus=4
found-> vendor=0x8086, dev=0x108b, revid=0x00
        bus=4, slot=0, func=0
        class=02-00-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=10
        powerspec 2  supports D0 D3  current D0
        MSI supports 1 message, 64 bit
        map[10]: type 1, range 32, base d8100000, size 17, enabled
pcib4: (null) requested memory range 0xd8100000-0xd811ffff: good
        map[18]: type 4, range 32, base 00005000, size  5, enabled
pcib4: (null) requested I/O range 0x5000-0x501f: in range
pcib4: matched entry for 4.0.INTA
pcib4: slot 0 INTA hardwired to IRQ 17
em1:  port
0x5000-0x501f mem 0xd8100000-0xd811ffff irq 17 at device 0.0 on pci4
em1: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xd8100000
em1: Reserved 0x20 bytes for rid 0x18 type 4 at 0x5000
em1: bpf attached
em1: Ethernet address: 00:13:d3:fe:05:8f
ioapic0: routing intpin 17 (PCI IRQ 17) to vector 50
em1: [FAST]
uhci0:  port 0x3000-0x301f irq 23 at device
29.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x3000
ioapic0: routing intpin 23 (PCI IRQ 23) to vector 51
uhci0: [GIANT-LOCKED]
usb0:  on uhci0
usb0: USB revision 1.0
uhub0:  on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1:  port 0x3020-0x303f irq 19 at device
29.1 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x3020
ioapic0: routing intpin 19 (PCI IRQ 19) to vector 52
uhci1: [GIANT-LOCKED]
usb1:  on uhci1
usb1: USB revision 1.0
uhub1:  on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2:  port 0x3040-0x305f irq 18 at device
29.2 on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x3040
ioapic0: routing intpin 18 (PCI IRQ 18) to vector 53
uhci2: [GIANT-LOCKED]
usb2:  on uhci2
usb2: USB revision 1.0
uhub2:  on usb2
uhub2: 2 ports with 2 removable, self powered
uhci3:  port 0x3060-0x307f irq 16 at device
29.3 on pci0
uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0x3060
uhci3: [GIANT-LOCKED]
usb3:  on uhci3
usb3: USB revision 1.0
uhub3:  on usb3
uhub3: 2 ports with 2 removable, self powered
ehci0:  mem
0xd8500000-0xd85003ff
irq 23 at device 29.7 on pci0
ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xd8500000
ehci0: [GIANT-LOCKED]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4:  on ehci0
usb4: USB revision 2.0
uhub4:  on usb4
uhub4: 8 ports with 8 removable, self powered
pcib5:  at device 30.0 on pci0
pcib5:   secondary bus     10
pcib5:   subordinate bus   10
pcib5:   I/O decode        0x6000-0x6fff
pcib5:   memory decode     0xd8200000-0xd82fffff
pcib5:   prefetched decode 0xd0000000-0xd7ffffff
pcib5:   Subtractively decoded bridge.
pci10:  on pcib5
pci10: physical bus=10
found-> vendor=0x1002, dev=0x5159, revid=0x00
        bus=10, slot=0, func=0
        class=03-00-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0387, statreg=0x02b0, cachelnsz=8 (dwords)
        lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=10
        powerspec 2  supports D0 D1 D2 D3  current D0
        map[10]: type 3, range 32, base d0000000, size 27, enabled
pcib5: (null) requested memory range 0xd0000000-0xd7ffffff: good
        map[14]: type 4, range 32, base 00006000, size  8, enabled
pcib5: (null) requested I/O range 0x6000-0x60ff: in range
        map[18]: type 1, range 32, base d8200000, size 16, enabled
pcib5: (null) requested memory range 0xd8200000-0xd820ffff: good
pcib5: matched entry for 10.0.INTA
pcib5: slot 0 INTA hardwired to IRQ 16
vgapci0:  port 0x6000-0x60ff mem
0xd0000000-0xd7ffffff,0xd8200000-0xd820ffff irq 16 at device 0.0 on pci10
isab0:  at device 31.0 on pci0
isa0:  on isab0
atapci0:  port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x30a0-0x30af at device 31.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x30a0
ata0:  on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=51 ostat1=00
ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: stat1=0x00 err=0x00 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=00 stat1=00 devices=0x4
ioapic0: routing intpin 14 (ISA IRQ 14) to vector 54
ata0: [MPSAFE]
ata1:  on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=00 ostat0=ff ostat1=ff
ioapic0: routing intpin 15 (ISA IRQ 15) to vector 55
ata1: [MPSAFE]
atapci1:  port
0x30e8-0x30ef,0x30dc-0x30df,0x30e0-0x30e7,0x30d8-0x30db,0x30b0-0x30bf mem
0xd8500400-0xd85007ff irq 19 at device 31.2 on pci0
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0x30b0
atapci1: [MPSAFE]
atapci1: Reserved 0x400 bytes for rid 0x24 type 3 at 0xd8500400
ata2:  on atapci1
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x30e8
atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0x30dc
ata2: reset tp1 mask=03 ostat0=7f ostat1=7f
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat1=0x7f err=0xff lsb=0xff msb=0xff
ata2: reset tp2 stat0=ff stat1=ff devices=0x0
ata2: [MPSAFE]
ata3:  on atapci1
atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0x30e0
atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0x30d8
ata3: reset tp1 mask=03 ostat0=50 ostat1=00
ata3: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata3: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata3: reset tp2 stat0=50 stat1=00 devices=0x1
ata3: [MPSAFE]
pci0:  at device 31.3 (no driver attached)
acpi_button0:  on acpi0
sio0: irq maps: 0x4c21 0x4c29 0x4c21 0x4c21
sio0: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 flags 0x10 on
acpi0
sio0: type 16550A, console
ioapic0: routing intpin 3 (ISA IRQ 3) to vector 56
sio0: [FAST]
sio1: irq maps: 0x4c21 0x4c31 0x4c21 0x4c21
sio1: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 on acpi0
sio1: type 16550A
ioapic0: routing intpin 4 (ISA IRQ 4) to vector 57
sio1: [FAST]
psmcpnp0:  irq 12 on acpi0
atkbdc0:  port 0x60,0x64 irq 1 on acpi0
atkbd0:  irq 1 on atkbdc0
kbd0 at atkbd0
kbd0: atkbd0, generic (0), config:0x0, flags:0x3f0000
ioapic0: routing intpin 1 (ISA IRQ 1) to vector 58
atkbd0: [GIANT-LOCKED]
psm0: current command byte:0067
psm0: failed to reset the aux device.
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
ex_isa_identify()
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
orm0:  at iomem
0xc0000-0xcafff,0xdc000-0xdffff,0xe0000-0xe17ff pnpid ORM0000 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
ppc0: parallel port not found.
ppc0:  failed to probe at irq 7 on isa0
sc0:  at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0:  at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
lapic: Divisor 2, Frequency 99750618 hz
Timecounter "TSC" frequency 3192019656 Hz quality -100
Timecounters tick every 1.000 msec
lo0: bpf attached
rr232x: no controller detected.
em0: Link is up 1000 Mbps Full Duplex
em1: Link is up 1000 Mbps Full Duplex
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire
acd0: setting PIO4 on ICH7 chip
acd0: setting UDMA33 on ICH7 chip
acd0:  CDRW drive at ata0 as master
acd0:  2048KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet
acd0: Writes: CDR, CDRW, test write, burnproof
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
ata3-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad6: 76319MB  at ata3-master SATA150
ad6: 156301488 sectors [155061C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad6
ad6: Intel check1 failed
ad6: Adaptec check1 failed
ad6: LSI (v3) check1 failed
ad6: LSI (v2) check1 failed
ad6: FreeBSD check1 failed
ATA PseudoRAID loaded
SMP: AP CPU #1 Launched!
cpu1 AP:
     ID: 0x01000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
INTR: Assigning IRQ 1 to local APIC 0
ioapic0: Assigning ISA IRQ 1 to local APIC 0
INTR: Assigning IRQ 3 to local APIC 1
ioapic0: Assigning ISA IRQ 3 to local APIC 1
INTR: Assigning IRQ 4 to local APIC 0
ioapic0: Assigning ISA IRQ 4 to local APIC 0
INTR: Assigning IRQ 9 to local APIC 1
ioapic0: Assigning ISA IRQ 9 to local APIC 1
INTR: Assigning IRQ 14 to local APIC 0
ioapic0: Assigning ISA IRQ 14 to local APIC 0
INTR: Assigning IRQ 15 to local APIC 1
ioapic0: Assigning ISA IRQ 15 to local APIC 1
INTR: Assigning IRQ 16 to local APIC 0
ioapic0: Assigning PCI IRQ 16 to local APIC 0
INTR: Assigning IRQ 17 to local APIC 1
ioapic0: Assigning PCI IRQ 17 to local APIC 1
INTR: Assigning IRQ 18 to local APIC 0
ioapic0: Assigning PCI IRQ 18 to local APIC 0
INTR: Assigning IRQ 19 to local APIC 1
ioapic0: Assigning PCI IRQ 19 to local APIC 1
INTR: Assigning IRQ 23 to local APIC 0
ioapic0: Assigning PCI IRQ 23 to local APIC 0
Trying to mount root from ufs:/dev/ad6s1a
start_init: trying /sbin/init
Loading configuration files.
kernel dumps on /dev/ad6s1b
Entropy harvesting:
 interrupts
 ethernet
 point_to_point
 kickstart
.
swapon: adding /dev/ad6s1b as swap device
Starting file system checks:
/dev/ad6s1a: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad6s1a: clean, 35769111 free (9167 frags, 4469993 blocks, 0.0%
fragmentation)
Setting hostname: pogo-2.f5test.net.
em0: Link is Down
em1: Link is Down
lo0: flags=8049 mtu 16384
        inet6 ::1 prefixlen 128 
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3 
        inet 127.0.0.1 netmask 0xff000000 
em0: flags=8843 mtu 1500
        options=8b
        inet6 fe80::213:d3ff:fefe:58e%em0 prefixlen 64 tentative scopeid
0x1 
        inet 172.16.17.2 netmask 0xfffff000 broadcast 172.16.31.255
        ether 00:13:d3:fe:05:8e
        media: Ethernet autoselect
        status: no carrier
em1: flags=8843 mtu 1500
        options=8b
        inet6 fe80::213:d3ff:fefe:58f%em1 prefixlen 64 tentative scopeid
0x2 
        inet 172.16.64.2 netmask 0xfffff000 broadcast 172.16.79.255
        ether 00:13:d3:fe:05:8f
        media: Ethernet autoselect
        status: no carrier
Starting devd.
hw.acpi.cpu.cx_lowest: 
C1
 -> 
C1

add net 172.16.240.0: gateway 172.16.31.33
Additional routing options:
.
add net ::ffff:0.0.0.0: gateway ::1
add net ::0.0.0.0: gateway ::1
net.inet6.ip6.forwarding: 
0
 -> 
0

net.inet6.ip6.accept_rtadv: 
0
 -> 
1

em0: Link is up 1000 Mbps Full Duplex
em1: Link is up 1000 Mbps Full Duplex
add net fe80::: gateway ::1
add net ff02::: gateway ::1
IPv4 mapped IPv6 address support=YES
Mounting NFS file systems:
.
ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib
a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout
Creating and/or trimming log files:
.
Starting syslogd.
Checking for core dump on /dev/ad6s1b...
savecore: no dumps found
Initial i386 initialization:
.
Additional ABI support:
.
NFS access cache time=60
Starting lighttpd.
Starting LCDd.
Jun 29 14:36:29 pogo-2 LCDd: ms6931: open(/dev/cuad0) failed (Device busy)
Jun 29 14:36:29 pogo-2 LCDd: Driver [ms6931] init failed, return code < 0
Jun 29 14:36:29 pogo-2 LCDd: Could not load driver ms6931
Jun 29 14:36:29 pogo-2 LCDd: There is no output driver
Jun 29 14:36:29 pogo-2 LCDd: Critical error while initializing, abort.
Starting lcdproc.
Error connecting to LCD server localhost on port 13666.
Check to see that the server is running and operating normally.
Starting local daemons:
.
Updating motd
.
Starting ntpd.
Configuring syscons:
 blanktime
.
Starting sshd.
Starting cron.
Local package initialization:
.
Additional TCP options:
.
Starting inetd.
Starting background file system checks in 60 seconds.

Thu Jun 29 14:36:30 PDT 2006
Jun 29 14:36:36 pogo-2 login: ROOT LOGIN (root) ON ttyd1
-- 
othermark
atkin901 at nospam dot yahoo dot com
(!wired)?(coffee++):(wired);
 
CD: 4ms