Home
Reading
Searching
Subscribe
Sponsors
Statistics
Posting
Contact
Spam
Lists
Links
About
Hosting
Filtering
Features Download
Marketing
Archives
FAQ
Blog
 
Gmane
From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= <bjorn-yOkvZcmFvRU <at> public.gmane.org>
Subject: [PATCH net-next v6 0/3] The huawei_cdc_ncm driver
Newsgroups: gmane.linux.usb.general
Date: Monday 4th November 2013 08:50:46 UTC (over 3 years ago)
Enrico has been kind enough to let me repost his driver with the changes
requested by Oliver Neukum during the last review of this series.

The changes I have made from Enricos original v5 series to this version
are:

v6:
 - fix to avoid corrupting drvstate->pmcount
 - fix error return value from huawei_cdc_ncm_suspend()
 - drop redundant testing for subdriver->suspend during resume
 - broke a few lines to keep within the 80 columns recommendation
 - rebased on top of current net-next

Enrico's orginal introduction to the v5 series follows below.  It explains
the background much better than I can.

Bjørn


[quote Enrico Mioso]

So this is a new, revised, edition of the huawei_cdc_ncm.c driver, which 
supports devices resembling the NCM standard, but using it also as a mean 
to encapsulate other protocols, as is the case for the Huawei E3131 and
E3251 modem devices.
Some precisations are needed however - and I encourage discussion on this:
and 
that's why I'm sending this message with a broader CC.
Merging those patches might change:
- the way Modem Manager interacts with those devices
- some regressions might be possible if there are some unknown firmware 
  variants around (Franko?)

First of all: I observed the behaviours of two devices.
Huawei E3131: this device doesn't accept NDIS setup requests unless they're

sent via the embedded AT channel exposed by this driver.
So actually we gain funcionality in this case!

The second case, is the Huawei E3251: which works with standard NCM driver,

still exposing an AT embedded channel. Whith this patch set applied, you
gain 
some funcionality, loosing the ability to catch standard NCM events for
now.
The device will work in both ways with no problems, but this has to be 
acknowledged and discussed. Might be we can develop this driver further to 
change this, when more devices are tested.

We where thinking Huawei changed their interfaces on new devices - but
probably 
this driver only works around a nice firmware bug present in E3131, which 
prevented the modem from being used in NDIS mode.

I think committing this is definitely wortth-while, since it will allow for

more Huawei devices to be used without serial connection. Some devices like
the 
E3251 also, reports some status information only via the embedded AT
channel, 
at least in my case.
Note: I'm not subscribed to any list except the Modem Manager's one, so
please 
CC me, thanks!!

[/quote]

Enrico Mioso (3):
  net: cdc_ncm: Export cdc_ncm_{tx,rx}_fixup functions for re-use
  net: huawei_cdc_ncm: Introduce the huawei_cdc_ncm driver
  net: cdc_ncm: remove non-standard NCM device IDs

 drivers/net/usb/Kconfig          |   15 +++
 drivers/net/usb/Makefile         |    1 +
 drivers/net/usb/cdc_ncm.c        |   17 +--
 drivers/net/usb/huawei_cdc_ncm.c |  230
++++++++++++++++++++++++++++++++++++++
 include/linux/usb/cdc_ncm.h      |    3 +
 5 files changed, 253 insertions(+), 13 deletions(-)
 create mode 100644 drivers/net/usb/huawei_cdc_ncm.c

-- 
1.7.10.4

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
 
CD: 3ms