Home
Reading
Searching
Subscribe
Sponsors
Statistics
Posting
Contact
Spam
Lists
Links
About
Hosting
Filtering
Features Download
Marketing
Archives
FAQ
Blog
 
Gmane
From: Krzysztof Kozlowski <k.kozlowski <at> samsung.com>
Subject: [PATCH 00/14] mfd/regulator/rtc: sec: Add support for S2MPS14
Newsgroups: gmane.linux.kernel
Date: Tuesday 11th February 2014 13:03:43 UTC (over 2 years ago)
Hi,


This patchset adds support for S2MPS14 device to the Samsung MFD driver
family.

The S2MPS14 is similar to S2MPS11 but it has fewer regulators, two
clocks instead of three and a little different registers layout.

The patchset is organized in following way:
1. Patches from 1 to 7 clean up the S2MPS1X/S5M876X drivers and prepare
   for adding S2MPS14 support (some symbol renaming is needed).
2. Patches from 8 to 10 add support for S2MPS14 to the MFD and regulator
   drivers. They depend on previous patches.
3. Patches 11 and 12 add opmode support for S2MPS14 regulator driver.
4. Patches 13 and 14 add support for S2MPS14 RTC and they depend on
previous
   MFD and RTC patches.

Probably the best way to get everything working and merged into the
linux-next
would be to obtain ACK-s from all maintainers and to put all the patches
into
the mfd-next tree.


The patchset is based on linux-next: next-20140211 *with* today's patch:
mfd: sec-core: Fix possible NULL pointer dereference when i2c_new_dummy
error


TODO
====
Add support for S2MPS14 to the S2MPS11 clock driver. The patch
is actually ready but it is based on the "Add support for clocks in
S5M8767"
   http://thread.gmane.org/gmane.linux.kernel/1587881/focus=1587882
which didn't get their way into clk-next. I will wait for them.


Krzysztof Kozlowski (14):
  mfd: sec: Add maximum RTC register for regmap config
  mfd: sec: Select different RTC regmaps for devices
  mfd/rtc: sec/sec: Rename SEC* symbols to S5M
  rtc: s5m: Remove undocumented time init on first boot
  mfd: sec: Use consistent S2MPS11 RTC alarm interrupt indexes
  regulator: s2mps11: Constify regulator_desc array
  regulator: s2mps11: Choose number of supported regulators during
    probe
  mfd: sec: Add support for S2MPS14
  regulator: s2mps11: Add support for S2MPS14 regulators
  Documentation: mfd: s2mps11: Document support for S2MPS14
  regulator: s2mps11: Add opmode for S2MPS14 regulators
  Documentation: mfd/regulator: s2mps11: Document the "op_mode"
    bindings
  rtc: s5m: Support different register layout
  rtc: s5m: Add support for S2MPS14 RTC

 Documentation/devicetree/bindings/mfd/s2mps11.txt |   58 ++-
 drivers/mfd/sec-core.c                            |   57 ++-
 drivers/mfd/sec-irq.c                             |   97 ++++-
 drivers/regulator/s2mps11.c                       |  393
+++++++++++++++++----
 drivers/rtc/rtc-s5m.c                             |  284 ++++++++++-----
 include/linux/mfd/samsung/core.h                  |    1 +
 include/linux/mfd/samsung/irq.h                   |   31 +-
 include/linux/mfd/samsung/rtc.h                   |  132 ++++---
 include/linux/mfd/samsung/s2mps14.h               |  169 +++++++++
 9 files changed, 1000 insertions(+), 222 deletions(-)
 create mode 100644 include/linux/mfd/samsung/s2mps14.h

-- 
1.7.9.5
 
CD: 3ms