From: Fenghua Yu
CPU0 or BSP (Bootstrap Processor) has been the last processor that can not
hot removed on x86. This patch set implements CPU0 or BSP online and
and removes this obstacle to CPU hotplug.
RAS needs the feature. If socket0 needs to be hotplugged for any reason
thread on socket0 is bad, shared cache issue, uncore issue, etc), CPU0 is
required to be offline or hot replaced to keep the system run. For example,
starting with Core Duo, if you have a system that is reporting cache
via the "yellow" status in the MCi_STATUS msr, then there is benefit in
soft off-lining the cores that share that cache - assuming that leaves you
least one online core. A single socket system with L3 cache troubles is not
helped - but problems in L1/L2 cache, or on multi-socket systems can be
They are already being avoided for the cases where CPU0 is not involved.
This patchset can help L1/L2 cache problem in CPU0 or L3 cache problem on
socket with CPU0 in a multi-socket system.
v5: Add CONFIG_BOOTPARAM_HOTPLUG_CPU0 and CONFIG_DEBUG_HOTPLUG_CPU0.
duplicate xstate_size init check. Wakeup CPU0 via nmi instead INITs. Add
mcheck_cpu_init when CPU0 online. Change variable bsp_hotpluggable to
cpu0_hotpluggable with __initdata qualifier.
v4: Add __read_mostly for internal bsp_hotpluggable variable. Add my email
address in cpu-hotplug.txt document. A wording change in comment.
v3: Register a pm notifier to check if CPU0 is online before
Small wording changes in document and print info.
v2: Add locking changes between cpu hotplug and hibernate/suspend. Change
irq bound to CPU0 detection.
Fenghua Yu (12):
Documentations/cpu-hotplug.tx, kernel-parameters.txt: Add x86 CPU0
x86/Kconfig: Add config switch for CPU0 hotplug
x86/topology.c: Support functions for CPU0 online/offline
x86/smpboot.c: Don't offline CPU0 if any irq can not be migrated out
of it and remove CPU0 check in smp_callin()
x86/power/cpu.c: Don't hibernate/suspend if CPU0 is offline
x86/head_64.S: Define start_cpu0
x86/head_32.S: Define start_cpu0
x86/smpboot.c: Wake up CPU0 via NMI instead of INITs
x86/common.c: Init CPU0 data during CPU0 online
x86/mtrr/main.c: Ask the first online CPU to save mtrr
x86/i387.c: Thread xstate is initialized only on CPU0 once
x86/topology.c: debug CPU0 hotplug
Documentation/cpu-hotplug.txt | 24 +++++++
Documentation/kernel-parameters.txt | 14 ++++
arch/x86/Kconfig | 44 ++++++++++++
arch/x86/include/asm/cpu.h | 1 +
arch/x86/include/asm/processor.h | 1 +
arch/x86/kernel/cpu/common.c | 17 ++++-
arch/x86/kernel/cpu/mtrr/main.c | 9 ++-
arch/x86/kernel/head_32.S | 17 ++++-
arch/x86/kernel/head_64.S | 15 ++++
arch/x86/kernel/i387.c | 6 ++-
arch/x86/kernel/smpboot.c | 124
arch/x86/kernel/topology.c | 66 +++++++++++++++++--
arch/x86/power/cpu.c | 44 ++++++++++++
13 files changed, 352 insertions(+), 30 deletions(-)