Home
Reading
Searching
Subscribe
Sponsors
Statistics
Posting
Contact
Spam
Lists
Links
About
Hosting
Filtering
Features Download
Marketing
Archives
FAQ
Blog
 
Gmane
From: Heiko =?iso-8859-1?q?St=FCbner?= <heiko <at> sntech.de>
Subject: [RFC v2] Add gpio-regulator driver
Newsgroups: gmane.linux.kernel
Date: Friday 30th September 2011 10:59:23 UTC (over 5 years ago)
As suggested by Mark Brown, I created a more generalised gpio-regulator
driver.

It is definitly not finished - it just implements my idea and compiles -
real world
testing and fixing follows this weekend. If possible I'd just like to make
sure I'm
on the right track this time :-) .

As the mechanisms of setting gpio states don't change with the regulator
type
it is also possible to use it as a current regulator.
Therefore it could replace i.e. the bq24022/bq2407x driver later on.

Platform data for the 3 gpio controlled regulators I know of could look
like:
struct gpio_regulator_config bq24022 = {
	.supply_name = "bq24022",

	.gpios = {
		GPIO_ISET2,
	},
	.nr_gpios = 1,

	.gpio_states = {
		{ .value = 100000, gpios = (0 << 0) },
		{ .value = 500000, gpios = (1 << 0) },
	},
	.nr_gpio_states = 2,
	.state_at_boot = (0 << 0),
	.type = REGULATOR_CURRENT,
};

struct gpio_regulator_config bq24075 = {
	.supply_name = "bq24075",

	.gpios = {
		GPIO_EN1,
		GPIO_EN2,
	},
	.nr_gpios = 2,

	.gpio_states = {
		{ .value = 100000, gpios = (0 << 1) | (0 << 0) },
		{ .value = 500000, gpios = (0 << 1) | (1 << 0) },
		{ .value = 975000, gpios = (1 << 1) | (0 << 0) },
	},
	.nr_gpio_states = 3,
	.state_at_boot = (0 << 1)|(0 << 0),
	.type = REGULATOR_CURRENT,
};

struct gpio_regulator_config tps650240 = {
	.supply_name = "tps650240-dcdc3",

	.gpios = {
		GPIO_DEFDCDC3,
	},
	.nr_gpios = 1,

	.gpio_states = {
		{ .value = 1000000, gpios = (0 << 0) },
		{ .value = 1300000, gpios = (1 << 0) },
	},
	.nr_gpio_states = 2,
	.state_at_boot = (1 << 0),
	.type = REGULATOR_VOLTAGE,
};

Comments?

---
 drivers/regulator/Kconfig                |    6 +
 drivers/regulator/Makefile               |    1 +
 drivers/regulator/gpio-regulator.c       |  361
++++++++++++++++++++++++++++++
 include/linux/regulator/gpio-regulator.h |   84 +++++++
 4 files changed, 452 insertions(+), 0 deletions(-)
 create mode 100644 drivers/regulator/gpio-regulator.c
 create mode 100644 include/linux/regulator/gpio-regulator.h

diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 8510d8c..57e2ccc 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -72,6 +72,12 @@ config REGULATOR_USERSPACE_CONSUMER
 
           If unsure, say no.
 
+config REGULATOR_GPIO
+	tristate "gpio regulator support"
+	help
+	  This driver provides support for regulators that can be
+	  controlled by setting gpios.
+
 config REGULATOR_BQ24022
 	tristate "TI bq24022 Dual Input 1-Cell Li-Ion Charger IC"
 	help
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 5a8f4ee..44dcac3 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -9,6 +9,7 @@ obj-$(CONFIG_REGULATOR_SWITCHED_VOLTAGE) += switch.o
 obj-$(CONFIG_REGULATOR_VIRTUAL_CONSUMER) += virtual.o
 obj-$(CONFIG_REGULATOR_USERSPACE_CONSUMER) += userspace-consumer.o
 
+obj-$(CONFIG_REGULATOR_GPIO) += gpio-regulator.o
 obj-$(CONFIG_REGULATOR_AD5398) += ad5398.o
 obj-$(CONFIG_REGULATOR_BQ24022) += bq24022.o
 obj-$(CONFIG_REGULATOR_LP3971) += lp3971.o
diff --git a/drivers/regulator/gpio-regulator.c
b/drivers/regulator/gpio-regulator.c
new file mode 100644
index 0000000..ed7ed40
--- /dev/null
+++ b/drivers/regulator/gpio-regulator.c
@@ -0,0 +1,363 @@
+/*
+ * gpio-regulator.c
+ *
+ * Copyright 2011 Heiko Stuebner 
+ *
+ * based on fixed.c
+ *
+ * Copyright 2008 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown 
+ *
+ * Copyright (c) 2009 Nokia Corporation
+ * Roger Quadros 
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This is useful for systems with mixed controllable and
+ * non-controllable regulators, as well as for allowing testing on
+ * systems with no controllable regulators.
+ */
+
+#include 
+#include 
+#include 
+#include 
+#include 
+#include 
+#include 
+#include 
+#include 
+
+struct gpio_regulator_data {
+	struct regulator_desc desc;
+	struct regulator_dev *dev;
+
+	int enable_gpio;
+	bool enable_high;
+	bool is_enabled;
+	unsigned startup_delay;
+
+	int *gpios;
+	int nr_gpios;
+
+	struct gpio_regulator_state *gpio_states;
+	int nr_gpio_states;
+
+	int state;
+};
+
+static int gpio_regulator_is_enabled(struct regulator_dev *dev)
+{
+	struct gpio_regulator_data *data = rdev_get_drvdata(dev);
+
+	return data->is_enabled;
+}
+
+static int gpio_regulator_enable(struct regulator_dev *dev)
+{
+	struct gpio_regulator_data *data = rdev_get_drvdata(dev);
+
+	if (gpio_is_valid(data->enable_gpio)) {
+		gpio_set_value_cansleep(data->enable_gpio, data->enable_high);
+		data->is_enabled = true;
+	}
+
+	return 0;
+}
+
+static int gpio_regulator_disable(struct regulator_dev *dev)
+{
+	struct gpio_regulator_data *data = rdev_get_drvdata(dev);
+
+	if (gpio_is_valid(data->enable_gpio)) {
+		gpio_set_value_cansleep(data->enable_gpio, !data->enable_high);
+		data->is_enabled = false;
+	}
+
+	return 0;
+}
+
+static int gpio_regulator_enable_time(struct regulator_dev *dev)
+{
+	struct gpio_regulator_data *data = rdev_get_drvdata(dev);
+
+	return data->startup_delay;
+}
+
+static int gpio_regulator_get_value(struct regulator_dev *dev)
+{
+	struct gpio_regulator_data *data = rdev_get_drvdata(dev);
+	int ptr;
+
+	for (ptr = 0; ptr < data->nr_gpio_states; ptr++)
+		if (data->gpio_states[ptr].gpios == data->state)
+			return data->gpio_states[ptr].value;
+
+	return -EINVAL;
+}
+
+static int gpio_regulator_set_value(struct regulator_dev *dev,
+					int min, int max)
+{
+	struct gpio_regulator_data *data = rdev_get_drvdata(dev);
+	int ptr, target, state;
+
+	target = -1;
+	for (ptr = 0; ptr < data->nr_gpio_states; ptr++)
+		if (data->gpio_states[ptr].value >= min &&
+		    data->gpio_states[ptr].value <= max)
+			target = data->gpio_states[ptr].gpios;
+
+	if (target < 0)
+		return -EINVAL;
+
+	for (ptr = 0; ptr < data->nr_gpios; ptr++) {
+		state = (target & (1 << ptr)) >> ptr;
+		gpio_set_value(data->gpios[ptr], state);
+	}
+
+	data->state = target;
+
+	return 0;
+}
+
+static int gpio_regulator_set_voltage(struct regulator_dev *dev,
+					int min_uV, int max_uV,
+					unsigned *selector)
+{
+	return gpio_regulator_set_value(dev, min_uV, max_uV);
+}
+
+static int gpio_regulator_list_voltage(struct regulator_dev *dev,
+				      unsigned selector)
+{
+	struct gpio_regulator_data *data = rdev_get_drvdata(dev);
+
+	if (selector >= data->nr_gpio_states)
+		return -EINVAL;
+
+	return data->gpio_states[selector].value;
+}
+
+static int gpio_regulator_set_current_limit(struct regulator_dev *dev,
+					int min_uA, int max_uA)
+{
+	return gpio_regulator_set_value(dev, min_uA, max_uA);
+}
+
+static struct regulator_ops gpio_regulator_voltage_ops = {
+	.is_enabled = gpio_regulator_is_enabled,
+	.enable = gpio_regulator_enable,
+	.disable = gpio_regulator_disable,
+	.enable_time = gpio_regulator_enable_time,
+	.get_voltage = gpio_regulator_get_value,
+	.set_voltage = gpio_regulator_set_voltage,
+	.list_voltage = gpio_regulator_list_voltage,
+};
+
+static struct regulator_ops gpio_regulator_current_ops = {
+	.is_enabled = gpio_regulator_is_enabled,
+	.enable = gpio_regulator_enable,
+	.disable = gpio_regulator_disable,
+	.enable_time = gpio_regulator_enable_time,
+	.get_current_limit = gpio_regulator_get_value,
+	.set_current_limit = gpio_regulator_set_current_limit,
+};
+
+static int __devinit gpio_regulator_probe(struct platform_device *pdev)
+{
+	struct gpio_regulator_config *config = pdev->dev.platform_data;
+	struct gpio_regulator_data *drvdata;
+	int ptr, ret, state;
+
+	drvdata = kzalloc(sizeof(struct gpio_regulator_data), GFP_KERNEL);
+	if (drvdata == NULL) {
+		dev_err(&pdev->dev, "Failed to allocate device data\n");
+		return -ENOMEM;
+	}
+
+	drvdata->desc.name = kstrdup(config->supply_name, GFP_KERNEL);
+	if (drvdata->desc.name == NULL) {
+		dev_err(&pdev->dev, "Failed to allocate supply name\n");
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	drvdata->gpios = kmalloc(config->nr_gpios * sizeof(int), GFP_KERNEL);
+	if (drvdata->gpios == NULL) {
+		dev_err(&pdev->dev, "Failed to allocate gpio data\n");
+		ret = -ENOMEM;
+		goto err_name;
+	}
+	/* init gpios negative; ability to deinitialize only the set ones */
+	for (ptr = 0; ptr < config->nr_gpios; ptr++)
+		drvdata->gpios[ptr] = -EINVAL;
+
+	drvdata->gpio_states = kmemdup(config->gpio_states,
+				       config->nr_gpio_states *
+					 sizeof(struct gpio_regulator_state),
+				       GFP_KERNEL);
+	if (drvdata == NULL) {
+		dev_err(&pdev->dev, "Failed to allocate state data\n");
+		ret = -ENOMEM;
+		goto err_memgpio;
+	}
+
+	drvdata->desc.type = REGULATOR_VOLTAGE;
+	drvdata->desc.owner = THIS_MODULE;
+
+	/* if we are a voltage regulator */
+	switch (config->type) {
+	case REGULATOR_VOLTAGE:
+		drvdata->desc.ops = &gpio_regulator_voltage_ops;
+		drvdata->desc.n_voltages = config->nr_gpio_states;
+		break;
+	case REGULATOR_CURRENT:
+		drvdata->desc.ops = &gpio_regulator_current_ops;
+		break;
+	default:
+		dev_err(&pdev->dev, "No regulator type set\n");
+		ret = -EINVAL;
+		goto err_memgpio;
+		break;
+	}
+
+	drvdata->enable_gpio = config->enable_gpio;
+	drvdata->startup_delay = config->startup_delay;
+
+	if (gpio_is_valid(config->enable_gpio)) {
+		drvdata->enable_high = config->enable_high;
+
+		ret = gpio_request(config->enable_gpio, config->supply_name);
+		if (ret) {
+			dev_err(&pdev->dev,
+			   "Could not obtain regulator enable GPIO %d: %d\n",
+							config->enable_gpio, ret);
+			goto err_memstate;
+		}
+
+		/* set output direction without changing state
+		 * to prevent glitch
+		 */
+		drvdata->is_enabled = config->enabled_at_boot;
+		ret = drvdata->is_enabled ?
+				config->enable_high : !config->enable_high;
+
+		ret = gpio_direction_output(config->enable_gpio, ret);
+		if (ret) {
+			dev_err(&pdev->dev,
+			   "Could not configure regulator enable GPIO %d direction: %d\n",
+							config->enable_gpio, ret);
+			goto err_enablegpio;
+		}
+	} else {
+		/* Regulator without GPIO control is considered
+		 * always enabled
+		 */
+		drvdata->is_enabled = true;
+	}
+
+	drvdata->nr_gpios = config->nr_gpios;
+	for (ptr = 0; ptr < drvdata->nr_gpios; ptr++) {
+		ret = gpio_request(config->gpios[ptr], config->supply_name);
+		if (ret) {
+			dev_err(&pdev->dev,
+			   "Could not obtain regulator setting GPIO %d: %d\n",
+							config->gpios[ptr], ret);
+			goto err_stategpio;
+		}
+
+		drvdata->gpios[ptr] = config->gpios[ptr];
+
+		state = (config->state_at_boot & (1 << ptr)) >> ptr;
+		ret = gpio_direction_output(drvdata->gpios[ptr], state);
+		if (ret) {
+			dev_err(&pdev->dev,
+			   "Could not configure regulator enable GPIO %d direction: %d\n",
+							drvdata->gpios[ptr], ret);
+			goto err_stategpio;
+		}
+	}
+	drvdata->state = config->state_at_boot;
+
+	drvdata->dev = regulator_register(&drvdata->desc, &pdev->dev,
+					  config->init_data, drvdata);
+	if (IS_ERR(drvdata->dev)) {
+		ret = PTR_ERR(drvdata->dev);
+		dev_err(&pdev->dev, "Failed to register regulator: %d\n", ret);
+		goto err_stategpio;
+	}
+
+	platform_set_drvdata(pdev, drvdata);
+
+	return 0;
+
+err_stategpio:
+	for (ptr = 0; ptr < config->nr_gpios; ptr++)
+		if (gpio_is_valid(drvdata->gpios[ptr]))
+			gpio_free(drvdata->gpios[ptr]);
+err_enablegpio:
+	if (gpio_is_valid(config->enable_gpio))
+		gpio_free(config->enable_gpio);
+err_memstate:
+	kfree(drvdata->gpio_states);
+err_memgpio:
+	kfree(drvdata->gpios);
+err_name:
+	kfree(drvdata->desc.name);
+err:
+	kfree(drvdata);
+	return ret;
+}
+
+static int __devexit gpio_regulator_remove(struct platform_device *pdev)
+{
+	struct gpio_regulator_data *drvdata = platform_get_drvdata(pdev);
+	int ptr;
+
+	regulator_unregister(drvdata->dev);
+
+	for (ptr = 0; ptr < drvdata->nr_gpios; ptr++)
+		gpio_free(drvdata->gpios[ptr]);
+
+	kfree(drvdata->gpio_states);
+	kfree(drvdata->gpios);
+
+	if (gpio_is_valid(drvdata->enable_gpio))
+		gpio_free(drvdata->enable_gpio);
+
+	kfree(drvdata->desc.name);
+	kfree(drvdata);
+
+	return 0;
+}
+
+static struct platform_driver gpio_regulator_driver = {
+	.probe		= gpio_regulator_probe,
+	.remove		= __devexit_p(gpio_regulator_remove),
+	.driver		= {
+		.name		= "gpio-regulator",
+		.owner		= THIS_MODULE,
+	},
+};
+
+static int __init gpio_regulator_init(void)
+{
+	return platform_driver_register(&gpio_regulator_driver);
+}
+subsys_initcall(gpio_regulator_init);
+
+static void __exit gpio_regulator_exit(void)
+{
+	platform_driver_unregister(&gpio_regulator_driver);
+}
+module_exit(gpio_regulator_exit);
+
+MODULE_AUTHOR("Heiko Stuebner ");
+MODULE_DESCRIPTION("gpio voltage regulator");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:gpio-regulator");
diff --git a/include/linux/regulator/gpio-regulator.h
b/include/linux/regulator/gpio-regulator.h
new file mode 100644
index 0000000..f85d1e5
--- /dev/null
+++ b/include/linux/regulator/gpio-regulator.h
@@ -0,0 +1,84 @@
+/*
+ * gpio-regulator.h
+ *
+ * Copyright 2011 Heiko Stuebner 
+ *
+ * based on fixed.h
+ *
+ * Copyright 2008 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown 
+ *
+ * Copyright (c) 2009 Nokia Corporation
+ * Roger Quadros 
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ */
+
+#ifndef __REGULATOR_GPIO_H
+#define __REGULATOR_GPIO_H
+
+struct regulator_init_data;
+
+/**
+ * struct gpio_regulator_state - state description
+ * @value:		microvolts or microampere
+ * @gpios:		bitfield of gpio target-states for the value
+ *
+ * This structure describes a supported setting of the regulator
+ * and the necessary gpio-state to achieve it.
+ */
+struct gpio_regulator_state {
+	int value;
+	int gpios;
+};
+
+/**
+ * struct gpio_regulator_config - config structure
+ * @supply_name:	Name of the regulator supply
+ * @enable_gpio:	GPIO to use for enable control
+ * 			set to -EINVAL if not used
+ * @enable_high:	Polarity of enable GPIO
+ *			1 = Active high, 0 = Active low
+ * @enabled_at_boot:	Whether regulator has been enabled at
+ * 			boot or not. 1 = Yes, 0 = No
+ * 			This is used to keep the regulator at
+ * 			the default state
+ * @startup_delay:	Start-up time in microseconds
+ * @gpios:		Array containing the gpios needed to control
+ * 			the setting of the regulator
+ * @nr_gpios:		Number of gpios
+ * @gpio_states:	Array of gpio_regulator_state entries describing
+ * 			the gpio state for specific voltages
+ * @nr_gpio_states:	Number of states available
+ * @state_at_boot:	State set at boot, default state for the gpios
+ * @init_data:		regulator_init_data
+ *
+ * This structure contains gpio-voltage regulator configuration
+ * information that must be passed by platform code to the
+ * gpio-voltage regulator driver.
+ */
+struct gpio_regulator_config {
+	const char *supply_name;
+
+	int enable_gpio;
+	unsigned enable_high:1;
+	unsigned enabled_at_boot:1;
+	unsigned startup_delay;
+
+	int *gpios;
+	int nr_gpios;
+
+	struct gpio_regulator_state *gpio_states;
+	int nr_gpio_states;
+
+	int state_at_boot;
+
+	enum regulator_type type;
+	struct regulator_init_data *init_data;
+};
+
+#endif
-- 
1.7.5.4
 
CD: 3ms