Home
Reading
Searching
Subscribe
Sponsors
Statistics
Posting
Contact
Spam
Lists
Links
About
Hosting
Filtering
Features Download
Marketing
Archives
FAQ
Blog
 
Gmane
From: Denis 'GNUtoo' Carikli <GNUtoo <at> no-log.org>
Subject: [RESEND] gta02 machine stuck during boot
Newsgroups: gmane.linux.kernel.samsung-soc
Date: Tuesday 27th March 2012 23:00:02 UTC (over 5 years ago)
Hi,
Without the patch(the patch was not made by me) that will follow,
  my gta02 machine is stuck at the end of this log, without any reaction:

Uncompressing Linux... done, booting the kernel.
[    0.000000] Booting Linux on physical CPU 0
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.3.0-next-20120327 ([email protected]) (gcc
version 4.6.3 20111117 (prerelease) (GCC) ) #271 Wed Mar 28 00:48:08 CEST
2012
[    0.000000] CPU: ARM920T [41129200] revision 0 (ARMv4T), cr=c0007177
[    0.000000] CPU: VIVT data cache, VIVT instruction cache
[    0.000000] Machine: GTA02
[    0.000000] Ignoring tag cmdline (using the default kernel command line)
[    0.000000] Memory policy: ECC disabled, Data cache writeback
[    0.000000] CPU S3C2442B (id 0x32440aab)
[    0.000000] S3C24XX Clocks, Copyright 2004 Simtec Electronics
[    0.000000] S3C244X: core 400.000 MHz, memory 100.000 MHz, peripheral
50.000 MHz
[    0.000000] CLOCK: Slow mode (1.500 MHz), fast, MPLL on, UPLL on
[    0.000000] On node 0 totalpages: 32768
[    0.000000] free_area_init_node: node 0, pgdat c0401d38, node_mem_map
c0453000
[    0.000000]   Normal zone: 256 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 32512 pages, LIFO batch:7
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on. 
Total pages: 32512
[    0.000000] Kernel command line: console=ttySAC2,115200 init=/sbin/init
ro 
mtdparts=physmap-flash:-(nor);neo1973-nand:0x00040000(qi),0x00040000(depr-ub-env),0x00800000(kernel),0x000a0000(depr),0x00040000(identity-ext2),0x0f6a0000(rootfs)
 rootfstype=ubifs  ubi.mtd=6,2048  root=ubi0:om-gta02-rootfs init=/bin/ash
loglevel=8
[    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536
bytes)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Memory: 128MB = 128MB total
[    0.000000] Memory: 125480k/125480k available, 5592k reserved, 0K
highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xc8800000 - 0xff000000   ( 872 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xc8000000   ( 128 MB)
[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
[    0.000000]       .text : 0xc0008000 - 0xc03b3600   (3758 kB)
[    0.000000]       .init : 0xc03b4000 - 0xc03d6000   ( 136 kB)
[    0.000000]       .data : 0xc03d6000 - 0xc0402440   ( 178 kB)
[    0.000000]        .bss : 0xc0402464 - 0xc045270c   ( 321 kB)
[    0.000000] NR_IRQS:99
[    0.000000] irq: clearing pending ext status 000b02f0
[    0.000000] irq: clearing pending ext status 000902d0
[    0.000000] irq: clearing subpending status 000001c0
[    0.000000] irq: clearing subpending status 00000080
[    0.000000] timer tcon=00000000, tcnt a2c1, tcfg 00000200,00000000, usec
00001eb8
[    0.000000] sched_clock: 32 bits at 200 Hz, resolution 5000000ns, wraps
every 4294967291ms
[    0.000000] Console: colour dummy device 80x30
[    0.000000] Calibrating delay loop... 199.47 BogoMIPS (lpj=498688)
[    0.040000] pid_max: default: 32768 minimum: 301
[    0.040000] Mount-cache hash table entries: 512
[    0.040000] Initializing cgroup subsys cpuacct
[    0.040000] Initializing cgroup subsys devices
[    0.040000] Initializing cgroup subsys freezer
[    0.040000] CPU: Testing write buffer coherency: ok
[    0.040000] Setting up static identity map for 0x302d26f8 - 0x302d2774
[    0.045000] devtmpfs: initialized
[    0.045000] gpiochip_add: registered GPIOs 0 to 23 on device: GPIOA
[    0.045000] gpiochip_add: registered GPIOs 32 to 47 on device: GPIOB
[    0.050000] gpiochip_add: registered GPIOs 64 to 79 on device: GPIOC
[    0.050000] gpiochip_add: registered GPIOs 96 to 111 on device: GPIOD
[    0.050000] gpiochip_add: registered GPIOs 128 to 143 on device: GPIOE
[    0.050000] gpiochip_add: registered GPIOs 160 to 167 on device: GPIOF
[    0.050000] gpiochip_add: registered GPIOs 192 to 207 on device: GPIOG
[    0.050000] gpiochip_add: registered GPIOs 224 to 234 on device: GPIOH
[    0.050000] gpiochip_add: registered GPIOs 256 to 271 on device: GPIOJ
[    0.050000] dummy: 
[    0.050000] NET: Registered protocol family 16
[    0.055000] S3C Power Management, Copyright 2004 Simtec Electronics
[    0.055000] S3C2442: Initialising architecture
[    0.055000] S3C24XX DMA Driver, Copyright 2003-2006 Simtec Electronics
[    0.055000] DMA channel 0 at c8804000, irq 33
[    0.055000] DMA channel 1 at c8804040, irq 34
[    0.055000] DMA channel 2 at c8804080, irq 35
[    0.055000] DMA channel 3 at c88040c0, irq 36
[    0.055000] S3C244X: Clock Support, DVS off
[    0.065000] bio: create slab  at 0
[    0.065000] s3c-i2c s3c2440-i2c: slave address 0x10
[    0.065000] s3c-i2c s3c2440-i2c: bus frequency set to 97 KHz
[    0.075000] pcf50633 0-0073: Probed device version 19 variant 132
[    0.095000] wake enabled for irq 53
[    0.095000] auto: 3300 mV normal 
[    0.110000] down1: 1300 <--> 1600 mV at 1300 mV normal 
[    0.110000] down1: Voltage range but no REGULATOR_CHANGE_VOLTAGE
[    0.110000] down2: 1800 mV normal 
[    0.110000] ldo1: 3300 mV normal 
[    0.115000] ldo2: 3300 mV normal 
[    0.115000] ldo3: 3000 mV normal 
[    0.115000] ldo4: 3200 mV normal 
[    0.120000] ldo5: 3000 mV normal 
[    0.120000] ldo6: 3000 mV normal 
[    0.120000] hcldo: 2000 <--> 3300 mV at 3000 mV normal 
[    0.125000] memldo: 1800 mV normal 
[    0.125000] s3c-i2c s3c2440-i2c: i2c-0: S3C I2C adapter
[    0.125000] Advanced Linux Sound Architecture Driver Version 1.0.25.
[    0.170000] NET: Registered protocol family 2
[    0.170000] IP route cache hash table entries: 1024 (order: 0, 4096
bytes)
[    0.175000] TCP established hash table entries: 4096 (order: 3, 32768
bytes)
[    0.175000] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
[    0.175000] TCP: Hash tables configured (established 4096 bind 4096)
[    0.175000] TCP: reno registered
[    0.175000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.175000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.175000] NET: Registered protocol family 1
[    0.175000] s3c-adc s3c24xx-adc: operating without regulator "vdd" .
[    0.175000] platform s3c24xx-adc: Driver s3c-adc requests probe deferral
[    0.180000] jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat,
Inc.
[    0.180000] msgmni has been set to 245
[    0.185000] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 253)
[    0.185000] io scheduler noop registered
[    0.185000] io scheduler deadline registered (default)
[    0.190000] s3c2440-uart.0: ttySAC0 at MMIO 0x50000000 (irq = 70) is a
S3C2440
[    0.190000] s3c2440-uart.1: ttySAC1 at MMIO 0x50004000 (irq = 73) is a
S3C2440
[    0.190000] s3c2440-uart.2: ttySAC2 at MMIO 0x50008000 (irq = 76) is a
S3C2440

Denis.
 
CD: 2ms