Home
Reading
Searching
Subscribe
Sponsors
Statistics
Posting
Contact
Spam
Lists
Links
About
Hosting
Filtering
Features Download
Marketing
Archives
FAQ
Blog
 
Gmane
From: Jon Brenner <jbrenner-yYKgigLBUwlBDgjK7y7TUQ <at> public.gmane.org>
Subject: [PATCH V5] TAOS tsl2x7x
Newsgroups: gmane.linux.kernel.iio
Date: Monday 2nd April 2012 16:50:39 UTC (over 5 years ago)
TAOS device driver (version 5) for the tsl/tmd 2771 and 2772 device
families (inc. all variants).

Signed-off-by: Jon Brenner

---
 .../light/sysfs-bus-iio-light-tsl2583              |    6 +
 .../light/sysfs-bus-iio-light-tsl2x7x              |   14 +
 drivers/staging/iio/Documentation/sysfs-bus-iio    |    7 +
 .../staging/iio/Documentation/sysfs-bus-iio-light  |    8 +-
 .../iio/Documentation/sysfs-bus-iio-light-tsl2583  |   20 -
 drivers/staging/iio/light/Kconfig                  |    8 +
 drivers/staging/iio/light/Makefile                 |    2 +
 drivers/staging/iio/light/tsl2x7x.h                |   99 ++
 drivers/staging/iio/light/tsl2x7x_core.c           | 1830
++++++++++++++++++++
 9 files changed, 1970 insertions(+), 24 deletions(-)

diff --git
a/drivers/staging/iio/Documentation/light/sysfs-bus-iio-light-tsl2583
b/drivers/staging/iio/Documentation/light/sysfs-bus-iio-light-tsl2583
new file mode 100644
index 0000000..8f2a038
--- /dev/null
+++ b/drivers/staging/iio/Documentation/light/sysfs-bus-iio-light-tsl2583
@@ -0,0 +1,6 @@
+What:		/sys/bus/iio/devices/device[n]/illuminance0_calibrate
+KernelVersion:	2.6.37
+Contact:	[email protected]
+Description:
+		This property causes an internal calibration of the als gain trim
+		value which is later used in calculating illuminance in lux.
diff --git
a/drivers/staging/iio/Documentation/light/sysfs-bus-iio-light-tsl2x7x
b/drivers/staging/iio/Documentation/light/sysfs-bus-iio-light-tsl2x7x
new file mode 100644
index 0000000..275ae54
--- /dev/null
+++ b/drivers/staging/iio/Documentation/light/sysfs-bus-iio-light-tsl2x7x
@@ -0,0 +1,14 @@
+What:		/sys/bus/iio/devices/device[n]/illuminance0_calibrate
+KernelVersion:	2.6.37
+Contact:	[email protected]
+Description:
+		This property causes an internal calibration of the als gain trim
+		value which is later used in calculating illuminance in lux.
+
+What:		/sys/bus/iio/devices/device[n]/proximity_calibrate
+KernelVersion:	3.3-rc1
+Contact:	[email protected]
+Description:
+		Causes an recalculation and adjustment to the
+		proximity_thresh_rising_value.
+
diff --git a/drivers/staging/iio/Documentation/sysfs-bus-iio
b/drivers/staging/iio/Documentation/sysfs-bus-iio
index 46a995d..5b2b5d3 100644
--- a/drivers/staging/iio/Documentation/sysfs-bus-iio
+++ b/drivers/staging/iio/Documentation/sysfs-bus-iio
@@ -258,6 +258,8 @@
What		/sys/bus/iio/devices/iio:deviceX/in_accel_z_calibscale
 What		/sys/bus/iio/devices/iio:deviceX/in_anglvel_x_calibscale
 What		/sys/bus/iio/devices/iio:deviceX/in_anglvel_y_calibscale
 What		/sys/bus/iio/devices/iio:deviceX/in_anglvel_z_calibscale
+what		/sys/bus/iio/devices/iio:deviceX/illuminance0_calibscale
+what		/sys/bus/iio/devices/iio:deviceX/proximity_calibscale
 KernelVersion:	2.6.35
 Contact:	[email protected]
 Description:
@@ -457,6 +459,10 @@
What:		/sys/.../events/in_voltageY_raw_thresh_falling_value
 What:		/sys/.../events/in_voltageY_raw_thresh_falling_value
 What:		/sys/.../events/in_tempY_raw_thresh_falling_value
 What:		/sys/.../events/in_tempY_raw_thresh_falling_value
+What:		/sys/.../events/illuminance0_thresh_falling_value
+what:		/sys/.../events/illuminance0_thresh_rising_value
+what:		/sys/.../events/proximity_thresh_falling_value
+what:		/sys/.../events/proximity_thresh_rising_value
 KernelVersion:	2.6.37
 Contact:	[email protected]
 Description:
@@ -739,3 +745,4 @@ Description:
 		system. To minimize the current consumption of the system,
 		the bridge can be disconnected (when it is not being used
 		using the bridge_switch_en attribute.
+
diff --git a/drivers/staging/iio/Documentation/sysfs-bus-iio-light
b/drivers/staging/iio/Documentation/sysfs-bus-iio-light
index edbf470..4385c70 100644
--- a/drivers/staging/iio/Documentation/sysfs-bus-iio-light
+++ b/drivers/staging/iio/Documentation/sysfs-bus-iio-light
@@ -76,10 +76,10 @@
Contact:	[email protected]
 Description:
 		This property gets/sets the sensors ADC analog integration time.

-What:		/sys/bus/iio/devices/device[n]/illuminance0_calibscale
+What:		/sys/bus/iio/devices/device[n]/lux_table
 KernelVersion:	2.6.37
 Contact:	[email protected]
 Description:
-		Hardware or software applied calibration scale factor assumed
-		to account for attenuation due to industrial design (glass
-		filters or aperture holes).
+		This property gets/sets the table of coefficients
+		used in calculating illuminance in lux.
+
diff --git a/drivers/staging/iio/Documentation/sysfs-bus-iio-light-tsl2583
b/drivers/staging/iio/Documentation/sysfs-bus-iio-light-tsl2583
deleted file mode 100644
index 660781d..0000000
--- a/drivers/staging/iio/Documentation/sysfs-bus-iio-light-tsl2583
+++ /dev/null
@@ -1,20 +0,0 @@
-What:		/sys/bus/iio/devices/device[n]/lux_table
-KernelVersion:	2.6.37
-Contact:	[email protected]
-Description:
-		This property gets/sets the table of coefficients
-		used in calculating illuminance in lux.
-
-What:		/sys/bus/iio/devices/device[n]/illuminance0_calibrate
-KernelVersion:	2.6.37
-Contact:	[email protected]
-Description:
-		This property causes an internal calibration of the als gain trim
-		value which is later used in calculating illuminance in lux.
-
-What:		/sys/bus/iio/devices/device[n]/illuminance0_input_target
-KernelVersion:	2.6.37
-Contact:	[email protected]
-Description:
-		This property is the known externally illuminance (in lux).
-		It is used in the process of calibrating the device accuracy.
diff --git a/drivers/staging/iio/light/Kconfig
b/drivers/staging/iio/light/Kconfig
index e7e9159..976f790 100644
--- a/drivers/staging/iio/light/Kconfig
+++ b/drivers/staging/iio/light/Kconfig
@@ -31,4 +31,12 @@ config TSL2583
 	 Provides support for the TAOS tsl2580, tsl2581 and tsl2583 devices.
 	 Access ALS data via iio, sysfs.

+config TSL2x7x
+	tristate "TAOS TSL/TMD2x71 and TSL/TMD2x72 Family of light and proximity
sensors"
+	depends on I2C
+	help
+	 Support for: tsl2571, tsl2671, tmd2671, tsl2771, tmd2771, tsl2572,
tsl2672,
+	 tmd2672, tsl2772, tmd2772 devices.
+	 Provides iio_events and direct access via sysfs.
+
 endmenu
diff --git a/drivers/staging/iio/light/Makefile
b/drivers/staging/iio/light/Makefile
index 3011fbf..0b8fb22 100644
--- a/drivers/staging/iio/light/Makefile
+++ b/drivers/staging/iio/light/Makefile
@@ -5,3 +5,5 @@
 obj-$(CONFIG_SENSORS_TSL2563)	+= tsl2563.o
 obj-$(CONFIG_SENSORS_ISL29018)	+= isl29018.o
 obj-$(CONFIG_TSL2583)	+= tsl2583.o
+obj-$(CONFIG_TSL2x7x)	+= tsl2x7x_core.o
+obj-$(CONFIG_TCS3x7x)	+= tcs3x7x_core.o
diff --git a/drivers/staging/iio/light/tsl2x7x.h
b/drivers/staging/iio/light/tsl2x7x.h
new file mode 100644
index 0000000..fe9e853
--- /dev/null
+++ b/drivers/staging/iio/light/tsl2x7x.h
@@ -0,0 +1,99 @@
+/*
+ * Device driver for monitoring ambient light intensity (lux)
+ * and proximity (prox) within the TAOS TSL2X7X family of devices.
+ *
+ * Copyright (c) 2012, TAOS Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA	02110-1301, USA.
+ */
+
+#ifndef __TSL2X7X_H
+#define __TSL2X7X_H
+#include 
+
+/* Max number of segments allowable in LUX table */
+#define TSL2X7X_MAX_LUX_TABLE_SIZE		9
+#define MAX_DEFAULT_TABLE_BYTES (sizeof(int) * TSL2X7X_MAX_LUX_TABLE_SIZE)
+
+struct iio_dev;
+
+struct tsl2x7x_lux {
+	unsigned int ratio;
+	unsigned int ch0;
+	unsigned int ch1;
+};
+
+/**
+ * struct tsl2x7x_default_settings - power on defaults unless
+ *                                   overridden by platform data.
+ *  @als_time:              ALS Integration time - multiple of 50mS
+ *  @als_gain:              Index into the ALS gain table.
+ *  @prx_time:              5.2ms prox integration time -
+ *                          dec in 2.7ms periods
+ *  @wait_time:             Time between PRX and ALS cycles
+ *                          in 2.7 periods
+ *  @prox_config:           Prox configuration filters.
+ *  @als_gain_trim:         default gain trim to account for
+ *                          aperture effects.
+ *  @als_cal_target:        Known external ALS reading for
+ *                          calibration.
+ *  @als_thresh_low:        CH0 'low' count to trigger interrupt.
+ *  @als_thresh_high:       CH0 'high' count to trigger interrupt.
+ *  @persistence:           H/W Filters, Number of 'out of limits'
+ *                          ADC readings PRX/ALS.
+ *  @interrupts_en:         Enable/Disable - 0x00 = none, 0x10 = als,
+ *                                           0x20 = prx,  0x30 = bth
+ *  @prox_thres_low:        Low threshold proximity detection.
+ *  @prox_thres_high:       High threshold proximity detection
+ *  @prox_max_samples_cal:  Used for prox cal.
+ *  @prox_pulse_count:      Number if proximity emitter pulses
+ */
+struct tsl2x7x_settings {
+	int als_time;
+	int als_gain;
+	int als_gain_trim;
+	int wait_time;
+	int prx_time;
+	int prox_gain;
+	int prox_config;
+	int als_cal_target;
+	u8  interrupts_en;
+	u8  persistence;
+	int als_thresh_low;
+	int als_thresh_high;
+	int prox_thres_low;
+	int prox_thres_high;
+	int prox_pulse_count;
+	int prox_max_samples_cal;
+};
+
+/**
+ * struct tsl2X7X_platform_data - Platform callback, glass and defaults
+ * @platform_power:				Suspend/resume platform callback
+ * @power_on:					Power on callback
+ * @power_off:					Power off callback
+ * @platform_lux_table:			Device specific glass coefficents
+ * @platform_default_settings:	Device specific power on defaults
+ * Platform PM functions.
+ */
+struct tsl2X7X_platform_data {
+	int (*platform_power)(struct device *dev, pm_message_t);
+	int (*power_on)      (struct iio_dev *indio_dev);
+	int (*power_off)     (struct i2c_client *dev);
+	struct tsl2x7x_lux platform_lux_table[TSL2X7X_MAX_LUX_TABLE_SIZE];
+	struct tsl2x7x_settings *platform_default_settings;
+};
+
+#endif /* __TSL2X7X_H */
diff --git a/drivers/staging/iio/light/tsl2x7x_core.c
b/drivers/staging/iio/light/tsl2x7x_core.c
new file mode 100644
index 0000000..267faab
--- /dev/null
+++ b/drivers/staging/iio/light/tsl2x7x_core.c
@@ -0,0 +1,1830 @@
+/*
+ * Device driver for monitoring ambient light intensity in (lux)
+ * and proximity detection (prox) within the TAOS TSL2X7X family of
devices.
+ *
+ * Copyright (c) 2012, TAOS Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA        02110-1301, USA.
+ */
+
+#include 
+#include 
+#include 
+#include 
+#include 
+#include 
+#include 
+#include 
+#include 
+#include "tsl2x7x.h"
+#include "../events.h"
+#include "../iio.h"
+#include "../sysfs.h"
+
+/* Cal defs*/
+#define PROX_STAT_CAL        0
+#define PROX_STAT_SAMP       1
+#define MAX_SAMPLES_CAL      200
+
+/* TSL2X7X Device ID */
+#define TRITON_ID    0x00
+#define SWORDFISH_ID 0x30
+#define HALIBUT_ID   0x20
+
+/* Lux calculation constants */
+#define TSL2X7X_LUX_CALC_OVER_FLOW     65535
+
+/* TAOS Register definitions - note:
+ * depending on device, some of these register are not used and the
+ * register address is benign.
+ */
+/* 2X7X register offsets */
+#define TSL2X7X_MAX_CONFIG_REG         16
+
+/* Device Registers and Masks */
+#define TSL2X7X_CNTRL                  0x00
+#define TSL2X7X_ALS_TIME               0X01
+#define TSL2X7X_PRX_TIME               0x02
+#define TSL2X7X_WAIT_TIME              0x03
+#define TSL2X7X_ALS_MINTHRESHLO        0X04
+#define TSL2X7X_ALS_MINTHRESHHI        0X05
+#define TSL2X7X_ALS_MAXTHRESHLO        0X06
+#define TSL2X7X_ALS_MAXTHRESHHI        0X07
+#define TSL2X7X_PRX_MINTHRESHLO        0X08
+#define TSL2X7X_PRX_MINTHRESHHI        0X09
+#define TSL2X7X_PRX_MAXTHRESHLO        0X0A
+#define TSL2X7X_PRX_MAXTHRESHHI        0X0B
+#define TSL2X7X_PERSISTENCE            0x0C
+#define TSL2X7X_PRX_CONFIG             0x0D
+#define TSL2X7X_PRX_COUNT              0x0E
+#define TSL2X7X_GAIN                   0x0F
+#define TSL2X7X_NOTUSED                0x10
+#define TSL2X7X_REVID                  0x11
+#define TSL2X7X_CHIPID                 0x12
+#define TSL2X7X_STATUS                 0x13
+#define TSL2X7X_ALS_CHAN0LO            0x14
+#define TSL2X7X_ALS_CHAN0HI            0x15
+#define TSL2X7X_ALS_CHAN1LO            0x16
+#define TSL2X7X_ALS_CHAN1HI            0x17
+#define TSL2X7X_PRX_LO                 0x18
+#define TSL2X7X_PRX_HI                 0x19
+
+/* tsl2X7X cmd reg masks */
+#define TSL2X7X_CMD_REG                0x80
+#define TSL2X7X_CMD_SPL_FN             0x60
+
+#define TSL2X7X_CMD_PROX_INT_CLR       0X05
+#define TSL2X7X_CMD_ALS_INT_CLR        0x06
+#define TSL2X7X_CMD_PROXALS_INT_CLR    0X07
+
+/* tsl2X7X cntrl reg masks */
+#define TSL2X7X_CNTL_ADC_ENBL          0x02
+#define TSL2X7X_CNTL_PWR_ON            0x01
+
+/* tsl2X7X status reg masks */
+#define TSL2X7X_STA_ADC_VALID          0x01
+#define TSL2X7X_STA_PRX_VALID          0x02
+#define TSL2X7X_STA_ADC_PRX_VALID      0x03
+#define TSL2X7X_STA_ALS_INTR           0x10
+#define TSL2X7X_STA_ADC_INTR           0x10
+#define TSL2X7X_STA_PRX_INTR           0x20
+
+#define TSL2X7X_STA_ADC_INTR           0x10
+
+/* tsl2X7X cntrl reg masks */
+#define TSL2X7X_CNTL_REG_CLEAR         0x00
+#define TSL2X7X_CNTL_PROX_INT_ENBL     0X20
+#define TSL2X7X_CNTL_ALS_INT_ENBL      0X10
+#define TSL2X7X_CNTL_WAIT_TMR_ENBL     0X08
+#define TSL2X7X_CNTL_PROX_DET_ENBL     0X04
+#define TSL2X7X_CNTL_PWRON             0x01
+#define TSL2X7X_CNTL_ALSPON_ENBL       0x03
+#define TSL2X7X_CNTL_INTALSPON_ENBL    0x13
+#define TSL2X7X_CNTL_PROXPON_ENBL      0x0F
+#define TSL2X7X_CNTL_INTPROXPON_ENBL   0x2F
+
+/*Prox diode to use */
+#define TSL2X7X_DIODE0                 0x10
+#define TSL2X7X_DIODE1                 0x20
+#define TSL2X7X_DIODE_BOTH             0x30
+
+/* LED Power */
+#define TSL2X7X_mA100                  0x00
+#define TSL2X7X_mA50                   0x40
+#define TSL2X7X_mA25                   0x80
+#define TSL2X7X_mA13                   0xD0
+
+/*Common device IIO EventMask */
+#define TSL2X7X_EVENT_MASK \
+		(IIO_EV_BIT(IIO_EV_TYPE_THRESH, IIO_EV_DIR_RISING) | \
+		IIO_EV_BIT(IIO_EV_TYPE_THRESH, IIO_EV_DIR_FALLING)),
+
+/* TAOS txx2x7x Device family members */
+enum {
+	tsl2571,
+	tsl2671,
+	tmd2671,
+	tsl2771,
+	tmd2771,
+	tsl2572,
+	tsl2672,
+	tmd2672,
+	tsl2772,
+	tmd2772
+};
+
+enum {
+	TSL2X7X_CHIP_UNKNOWN = 0,
+	TSL2X7X_CHIP_WORKING = 1,
+	TSL2X7X_CHIP_SUSPENDED = 2
+};
+
+/* Per-device data */
+struct tsl2x7x_als_info {
+	u16 als_ch0;
+	u16 als_ch1;
+	u16 lux;
+};
+
+struct prox_stat {
+	u16 min;
+	u16 max;
+	u16 mean;
+	unsigned long stddev;
+};
+
+struct tsl2x7x_chip_info {
+	int chan_table_elements;
+	struct iio_chan_spec		channel[9];
+	const struct iio_info		*info;
+};
+
+struct tsl2X7X_chip {
+	kernel_ulong_t id;
+	struct mutex prox_mutex;
+	struct mutex als_mutex;
+	struct i2c_client *client;
+	u16 prox_data;
+	struct tsl2x7x_als_info als_cur_info;
+	struct tsl2x7x_settings tsl2x7x_settings;
+	struct tsl2X7X_platform_data *pdata;
+	int als_time_scale;
+	int als_saturation;
+	int tsl2x7x_chip_status;
+	u8 tsl2x7x_config[TSL2X7X_MAX_CONFIG_REG];
+	const struct tsl2x7x_chip_info	*chip_info;
+	const struct iio_info *info;
+	s64 event_timestamp;
+	/* This structure is intentionally large to accommodate
+	 * updates via sysfs. */
+	/* Sized to 9 = max 8 segments + 1 termination segment */
+	struct tsl2x7x_lux tsl2x7x_device_lux[TSL2X7X_MAX_LUX_TABLE_SIZE];
+};
+
+/* Different devices require different coefficents */
+static const struct tsl2x7x_lux tsl2x71_lux_table[] = {
+	{ 14461,   611,   1211 },
+	{ 18540,   352,    623 },
+	{     0,     0,      0 },
+};
+
+static const struct tsl2x7x_lux tmd2x71_lux_table[] = {
+	{ 11635,   115,    256 },
+	{ 15536,    87,    179 },
+	{     0,     0,      0 },
+};
+
+static const struct tsl2x7x_lux tsl2x72_lux_table[] = {
+	{ 14013,   466,   917 },
+	{ 18222,   310,   552 },
+	{     0,     0,     0 },
+};
+
+static const struct tsl2x7x_lux tmd2x72_lux_table[] = {
+	{ 13218,   130,   262 },
+	{ 17592,   92,    169 },
+	{     0,     0,     0 },
+};
+
+static const struct tsl2x7x_lux *tsl2x7x_default_lux_table_group[] = {
+	[tsl2571] =	tsl2x71_lux_table,
+	[tsl2671] =	tsl2x71_lux_table,
+	[tmd2671] =	tmd2x71_lux_table,
+	[tsl2771] =	tsl2x71_lux_table,
+	[tmd2771] =	tmd2x71_lux_table,
+	[tsl2572] =	tsl2x72_lux_table,
+	[tsl2672] =	tsl2x72_lux_table,
+	[tmd2672] =	tmd2x72_lux_table,
+	[tsl2772] =	tsl2x72_lux_table,
+	[tmd2772] =	tmd2x72_lux_table,
+};
+
+static const struct tsl2x7x_settings tsl2x7x_default_settings = {
+	.als_time = 200,
+	.als_gain = 0,
+	.prx_time = 0xfe, /*5.4 mS */
+	.prox_gain = 1,
+	.wait_time = 245,
+	.prox_config = 0,
+	.als_gain_trim = 1000,
+	.als_cal_target = 150,
+	.als_thresh_low = 200,
+	.als_thresh_high = 256,
+	.persistence = 0xFF,
+	.interrupts_en = 0x00,
+	.prox_thres_low  = 0,
+	.prox_thres_high = 512,
+	.prox_max_samples_cal = 30,
+	.prox_pulse_count = 8
+};
+
+static const s16 tsl2X7X_als_gainadj[] = {
+	1,
+	8,
+	16,
+	120
+};
+
+static const s16 tsl2X7X_prx_gainadj[] = {
+	1,
+	2,
+	4,
+	8
+};
+
+/* Channel variations */
+enum {
+	ALS,
+	PRX,
+	ALSPRX,
+	PRX2,
+	ALSPRX2,
+};
+
+const u8 device_channel_config[] = {
+	ALS,
+	PRX,
+	PRX,
+	ALSPRX,
+	ALSPRX,
+	ALS,
+	PRX2,
+	PRX2,
+	ALSPRX2,
+	ALSPRX2
+};
+
+/*
+ * Read a number of bytes starting at register (reg) location.
+ * Return 0, or i2c_smbus_write_byte ERROR code.
+ */
+static int
+tsl2x7x_i2c_read(struct i2c_client *client, u8 reg, u8 *val)
+{
+	int ret;
+
+	/* select register to write */
+	ret = i2c_smbus_write_byte(client, (TSL2X7X_CMD_REG | reg));
+	if (ret < 0) {
+		dev_err(&client->dev, "%s: failed to write register %x\n"
+				, __func__, reg);
+		return ret;
+	}
+	/* read the data */
+	*val = i2c_smbus_read_byte(client);
+
+	return 0;
+}
+
+/**
+ * tsl2x7x_get_lux() - Reads and calculates current lux value.
+ * @indio_dev:	IIO device
+ *
+ * The raw ch0 and ch1 values of the ambient light sensed in the last
+ * integration cycle are read from the device.
+ * Time scale factor array values are adjusted based on the integration
time.
+ * The raw values are multiplied by a scale factor, and device gain is
obtained
+ * using gain index. Limit checks are done next, then the ratio of a
multiple
+ * of ch1 value, to the ch0 value, is calculated. Array
tsl2x7x_device_lux[]
+ * is then scanned to find the first ratio value that is just above the
ratio
+ * we just calculated. The ch0 and ch1 multiplier constants in the array
are
+ * then used along with the time scale factor array values, to calculate
the
+ * lux.
+ */
+static int tsl2x7x_get_lux(struct iio_dev *indio_dev)
+{
+	u16 ch0, ch1; /* separated ch0/ch1 data from device */
+	u32 lux; /* raw lux calculated from device data */
+	u64 lux64;
+	u32 ratio;
+	u8 buf[4];
+	struct tsl2x7x_lux *p;
+	struct tsl2X7X_chip *chip = iio_priv(indio_dev);
+	int i, ret;
+	u32 ch0lux = 0;
+	u32 ch1lux = 0;
+
+	if (mutex_trylock(&chip->als_mutex) == 0) {
+		dev_info(&chip->client->dev, "tsl2x7x_get_lux device is busy\n");
+		return chip->als_cur_info.lux; /* busy, so return LAST VALUE */
+	}
+
+	if (chip->tsl2x7x_chip_status != TSL2X7X_CHIP_WORKING) {
+		/* device is not enabled */
+		dev_err(&chip->client->dev, "%s: device is not enabled\n",
+				__func__);
+		ret = -EBUSY ;
+		goto out_unlock;
+	}
+
+	ret = tsl2x7x_i2c_read(chip->client,
+		(TSL2X7X_CMD_REG | TSL2X7X_STATUS), &buf[0]);
+	if (ret < 0) {
+		dev_err(&chip->client->dev,
+			"%s: failed to read CMD_REG\n", __func__);
+		goto out_unlock;
+	}
+	/* is data new & valid */
+	if (!(buf[0] & TSL2X7X_STA_ADC_VALID)) {
+		dev_err(&chip->client->dev,
+			"%s: data not valid yet\n", __func__);
+		ret = chip->als_cur_info.lux; /* return LAST VALUE */
+		goto out_unlock;
+	}
+
+	for (i = 0; i < 4; i++) {
+		ret = tsl2x7x_i2c_read(chip->client,
+			(TSL2X7X_CMD_REG | (TSL2X7X_ALS_CHAN0LO + i)),
+			&buf[i]);
+		if (ret < 0) {
+			dev_err(&chip->client->dev,
+				"%s: failed to read. err=%x\n", __func__, ret);
+			goto out_unlock;
+		}
+	}
+
+	/* clear status, really interrupt status ( are off),
+	but we use the bit anyway */
+	ret = i2c_smbus_write_byte(chip->client,
+		(TSL2X7X_CMD_REG |
+				TSL2X7X_CMD_SPL_FN |
+				TSL2X7X_CMD_ALS_INT_CLR));
+
+	if (ret < 0) {
+		dev_err(&chip->client->dev,
+		"i2c_write_command failed in %s, err = %d\n",
+			__func__, ret);
+		goto out_unlock; /* have no data, so return failure */
+	}
+
+	/* extract ALS/lux data */
+	ch0 = le16_to_cpup((const __le16 *)&buf[0]);
+	ch1 = le16_to_cpup((const __le16 *)&buf[2]);
+
+	chip->als_cur_info.als_ch0 = ch0;
+	chip->als_cur_info.als_ch1 = ch1;
+
+	if ((ch0 >= chip->als_saturation) || (ch1 >= chip->als_saturation)) {
+		lux = TSL2X7X_LUX_CALC_OVER_FLOW;
+		goto return_max;
+	}
+
+	if (ch0 == 0) {
+		/* have no data, so return LAST VALUE */
+		ret = chip->als_cur_info.lux = 0;
+		goto out_unlock;
+	}
+	/* calculate ratio */
+	ratio = (ch1 << 15) / ch0;
+	/* convert to unscaled lux using the pointer to the table */
+	p = (struct tsl2x7x_lux *) chip->tsl2x7x_device_lux;
+	while (p->ratio != 0 && p->ratio < ratio)
+			p++;
+
+	if (p->ratio == 0) {
+		lux = 0;
+	} else {
+		ch0lux = DIV_ROUND_UP((ch0 * p->ch0),
+			tsl2X7X_als_gainadj[chip->tsl2x7x_settings.als_gain]);
+		ch1lux = DIV_ROUND_UP((ch1 * p->ch1),
+			tsl2X7X_als_gainadj[chip->tsl2x7x_settings.als_gain]);
+		lux = ch0lux - ch1lux;
+	}
+
+	/* note: lux is 31 bit max at this point */
+	if (ch1lux > ch0lux) {
+		dev_dbg(&chip->client->dev, "Returning last value\n");
+		ret = chip->als_cur_info.lux;
+		goto out_unlock;
+	}
+
+	/* adjust for active time scale */
+	if (chip->als_time_scale == 0)
+		lux = 0;
+	else
+		lux = (lux + (chip->als_time_scale >> 1)) /
+			chip->als_time_scale;
+
+	/* adjust for active gain scale
+	 * The tsl2x7x_device_lux tables have a factor of 256 built-in.
+	 * User-specified gain provides a multiplier.
+	 * Apply user-specified gain before shifting right to retain precision.
+	 * Use 64 bits to avoid overflow on multiplication.
+	 * Then go back to 32 bits before division to avoid using div_u64().
+	 */
+	lux64 = lux;
+	lux64 = lux64 * chip->tsl2x7x_settings.als_gain_trim;
+	lux64 >>= 8;
+	lux = lux64;
+	lux = (lux + 500) / 1000;
+
+	if (lux > TSL2X7X_LUX_CALC_OVER_FLOW) /* check for overflow */
+		lux = TSL2X7X_LUX_CALC_OVER_FLOW;
+
+	/* Update the structure with the latest lux. */
+return_max:
+	chip->als_cur_info.lux = lux;
+	ret = lux;
+
+out_unlock:
+	mutex_unlock(&chip->als_mutex);
+
+	return ret;
+}
+
+/* Proximity poll function */
+static int tsl2x7x_prox_poll(struct iio_dev *indio_dev)
+{
+	int i;
+	int ret;
+	u8 status;
+	u8 chdata[2];
+	struct tsl2X7X_chip *chip = iio_priv(indio_dev);
+
+	if (mutex_trylock(&chip->prox_mutex) == 0) {
+		dev_err(&chip->client->dev,
+			"%s: Can't get prox mutex\n", __func__);
+		return -EBUSY;
+	}
+
+	ret = tsl2x7x_i2c_read(chip->client,
+		(TSL2X7X_CMD_REG | TSL2X7X_STATUS), &status);
+	if (ret < 0) {
+		dev_err(&chip->client->dev,
+		"%s: i2c err=%d\n", __func__, ret);
+		goto prox_poll_err;
+	}
+
+	if (chip->id < tsl2572) {
+		if (!(status & TSL2X7X_STA_ADC_VALID))
+				goto prox_poll_err;
+	} else if (!(status & TSL2X7X_STA_PRX_VALID))
+				goto prox_poll_err;
+
+	for (i = 0; i < 2; i++) {
+		ret = tsl2x7x_i2c_read(chip->client,
+			(TSL2X7X_CMD_REG |
+					(TSL2X7X_PRX_LO + i)), &chdata[i]);
+		if (ret < 0)
+			goto prox_poll_err;
+	}
+
+	chip->prox_data =
+			le16_to_cpup((const __le16 *)&chdata[0]);
+
+prox_poll_err:
+
+	mutex_unlock(&chip->prox_mutex);
+	return chip->prox_data;
+}
+
+/*
+ * Provides initial operational parameter defaults.
+ * These defaults may be changed through the device's sysfs files.
+ */
+static void tsl2x7x_defaults(struct tsl2X7X_chip *chip)
+{
+	/* If Operational settings defined elsewhere.. */
+	if (chip->pdata && chip->pdata->platform_default_settings != 0)
+		memcpy(&(chip->tsl2x7x_settings),
+			chip->pdata->platform_default_settings,
+			sizeof(tsl2x7x_default_settings));
+	else
+		memcpy(&(chip->tsl2x7x_settings),
+			&tsl2x7x_default_settings,
+			sizeof(tsl2x7x_default_settings));
+
+	/* Load up the proper lux table. */
+	if (chip->pdata && chip->pdata->platform_lux_table[0].ratio != 0)
+		memcpy(chip->tsl2x7x_device_lux,
+			chip->pdata->platform_lux_table,
+			sizeof(chip->pdata->platform_lux_table));
+	else
+		memcpy(chip->tsl2x7x_device_lux,
+		(struct tsl2x7x_lux *)tsl2x7x_default_lux_table_group[chip->id],
+				MAX_DEFAULT_TABLE_BYTES);
+
+}
+
+/*
+ * Obtain single reading and calculate the als_gain_trim
+ * (later used to derive actual lux).
+ * Return updated gain_trim value.
+ */
+static int tsl2x7x_als_calibrate(struct iio_dev *indio_dev)
+{
+	struct tsl2X7X_chip *chip = iio_priv(indio_dev);
+	u8 reg_val;
+	int gain_trim_val;
+	int ret;
+	int lux_val;
+
+	ret = i2c_smbus_write_byte(chip->client,
+			(TSL2X7X_CMD_REG | TSL2X7X_CNTRL));
+	if (ret < 0) {
+		dev_err(&chip->client->dev,
+		"%s: failed to write CNTRL register, ret=%d\n",
+		__func__, ret);
+		return ret;
+	}
+
+	reg_val = i2c_smbus_read_byte(chip->client);
+	if ((reg_val & (TSL2X7X_CNTL_ADC_ENBL | TSL2X7X_CNTL_PWR_ON))
+		!= (TSL2X7X_CNTL_ADC_ENBL | TSL2X7X_CNTL_PWR_ON)) {
+		dev_err(&chip->client->dev,
+			"%s: failed: ADC not enabled\n", __func__);
+		return -1;
+	}
+
+	ret = i2c_smbus_write_byte(chip->client,
+			(TSL2X7X_CMD_REG | TSL2X7X_CNTRL));
+	if (ret < 0) {
+		dev_err(&chip->client->dev,
+			"%s: failed to write ctrl reg: ret=%d\n",
+			__func__, ret);
+		return ret;
+	}
+
+	reg_val = i2c_smbus_read_byte(chip->client);
+	if ((reg_val & TSL2X7X_STA_ADC_VALID) != TSL2X7X_STA_ADC_VALID) {
+		dev_err(&chip->client->dev,
+			"%s: failed: STATUS - ADC not valid.\n", __func__);
+		return -ENODATA;
+	}
+
+	lux_val = tsl2x7x_get_lux(indio_dev);
+	if (lux_val < 0) {
+		dev_err(&chip->client->dev,
+		"%s: failed to get lux\n", __func__);
+		return lux_val;
+	}
+
+	gain_trim_val =  (((chip->tsl2x7x_settings.als_cal_target)
+			* chip->tsl2x7x_settings.als_gain_trim) / lux_val);
+	if ((gain_trim_val < 250) || (gain_trim_val > 4000))
+		return -ERANGE;
+
+	chip->tsl2x7x_settings.als_gain_trim = gain_trim_val;
+	dev_info(&chip->client->dev,
+		"%s als_calibrate completed\n", chip->client->name);
+
+	return (int) gain_trim_val;
+}
+
+/*
+ * Turn the device on.
+ * Configuration must be set before calling this function.
+ */
+static int tsl2x7x_chip_on(struct iio_dev *indio_dev)
+{
+	int i;
+	int ret = 0;
+	u8 *dev_reg;
+	u8 utmp;
+	int als_count;
+	int als_time;
+	struct tsl2X7X_chip *chip = iio_priv(indio_dev);
+	u8 reg_val = 0;
+
+	if (chip->pdata && chip->pdata->power_on)
+		chip->pdata->power_on(indio_dev);
+
+	/* Non calculated parameters */
+	chip->tsl2x7x_config[TSL2X7X_PRX_TIME] =
+			chip->tsl2x7x_settings.prx_time;
+	chip->tsl2x7x_config[TSL2X7X_WAIT_TIME] =
+			chip->tsl2x7x_settings.wait_time;
+	chip->tsl2x7x_config[TSL2X7X_PRX_CONFIG] =
+			chip->tsl2x7x_settings.prox_config;
+
+	chip->tsl2x7x_config[TSL2X7X_ALS_MINTHRESHLO] =
+		(chip->tsl2x7x_settings.als_thresh_low) & 0xFF;
+	chip->tsl2x7x_config[TSL2X7X_ALS_MINTHRESHHI] =
+		(chip->tsl2x7x_settings.als_thresh_low >> 8) & 0xFF;
+	chip->tsl2x7x_config[TSL2X7X_ALS_MAXTHRESHLO] =
+		(chip->tsl2x7x_settings.als_thresh_high) & 0xFF;
+	chip->tsl2x7x_config[TSL2X7X_ALS_MAXTHRESHHI] =
+		(chip->tsl2x7x_settings.als_thresh_high >> 8) & 0xFF;
+	chip->tsl2x7x_config[TSL2X7X_PERSISTENCE] =
+		chip->tsl2x7x_settings.persistence;
+
+	chip->tsl2x7x_config[TSL2X7X_PRX_COUNT] =
+			chip->tsl2x7x_settings.prox_pulse_count;
+	chip->tsl2x7x_config[TSL2X7X_PRX_MINTHRESHLO] =
+	chip->tsl2x7x_settings.prox_thres_low;
+	chip->tsl2x7x_config[TSL2X7X_PRX_MAXTHRESHLO] =
+			chip->tsl2x7x_settings.prox_thres_high;
+
+	/* and make sure we're not already on */
+	if (chip->tsl2x7x_chip_status == TSL2X7X_CHIP_WORKING) {
+		/* if forcing a register update - turn off, then on */
+		dev_info(&chip->client->dev, "device is already enabled\n");
+		return -EINVAL;
+	}
+
+	/* determine als integration regster */
+	als_count = (chip->tsl2x7x_settings.als_time * 100 + 135) / 270;
+	if (als_count == 0)
+		als_count = 1; /* ensure at least one cycle */
+
+	/* convert back to time (encompasses overrides) */
+	als_time = (als_count * 27 + 5) / 10;
+	chip->tsl2x7x_config[TSL2X7X_ALS_TIME] = 256 - als_count;
+
+	/* Set the gain based on tsl2x7x_settings struct */
+	chip->tsl2x7x_config[TSL2X7X_GAIN] =
+		(chip->tsl2x7x_settings.als_gain |
+			(TSL2X7X_mA100 | TSL2X7X_DIODE1)
+			| ((chip->tsl2x7x_settings.prox_gain) << 2));
+
+	/* set chip struct re scaling and saturation */
+	chip->als_saturation = als_count * 922; /* 90% of full scale */
+	chip->als_time_scale = (als_time + 25) / 50;
+
+	/* TSL2X7X Specific power-on / adc enable sequence
+	 * Power on the device 1st. */
+	utmp = TSL2X7X_CNTL_PWR_ON;
+	ret = i2c_smbus_write_byte_data(chip->client,
+		TSL2X7X_CMD_REG | TSL2X7X_CNTRL, utmp);
+	if (ret < 0) {
+		dev_err(&chip->client->dev,
+			"%s: failed on CNTRL reg.\n", __func__);
+		return -1;
+	}
+
+	/* Use the following shadow copy for our delay before enabling ADC.
+	 * Write all the registers. */
+	for (i = 0, dev_reg = chip->tsl2x7x_config;
+			i < TSL2X7X_MAX_CONFIG_REG; i++) {
+		ret = i2c_smbus_write_byte_data(chip->client,
+				TSL2X7X_CMD_REG + i, *dev_reg++);
+		if (ret < 0) {
+			dev_err(&chip->client->dev,
+			"%s: failed on write to reg %d.\n", __func__, i);
+			return ret;
+		}
+	}
+
+	udelay(3000);	/* Power-on settling time */
+
+	/* NOW enable the ADC
+	 * initialize the desired mode of operation */
+	utmp = TSL2X7X_CNTL_PWR_ON |
+			TSL2X7X_CNTL_ADC_ENBL |
+			TSL2X7X_CNTL_PROX_DET_ENBL;
+	ret = i2c_smbus_write_byte_data(chip->client,
+			TSL2X7X_CMD_REG | TSL2X7X_CNTRL, utmp);
+	if (ret < 0) {
+		dev_err(&chip->client->dev,
+			"%s: failed on 2nd CTRL reg.\n", __func__);
+		return ret;
+		}
+
+	chip->tsl2x7x_chip_status = TSL2X7X_CHIP_WORKING;
+
+	if (chip->tsl2x7x_settings.interrupts_en != 0) {
+		dev_info(&chip->client->dev, "Setting Up Interrupt(s)\n");
+
+		reg_val = TSL2X7X_CNTL_PWR_ON | TSL2X7X_CNTL_ADC_ENBL;
+		if ((chip->tsl2x7x_settings.interrupts_en == 0x20) ||
+			(chip->tsl2x7x_settings.interrupts_en == 0x30))
+			reg_val |= TSL2X7X_CNTL_PROX_DET_ENBL;
+
+		reg_val |= chip->tsl2x7x_settings.interrupts_en;
+		ret = i2c_smbus_write_byte_data(chip->client,
+			(TSL2X7X_CMD_REG | TSL2X7X_CNTRL), reg_val);
+		if (ret < 0)
+			dev_err(&chip->client->dev,
+				"%s: failed in tsl2x7x_IOCTL_INT_SET.\n",
+				__func__);
+
+		/* Clear out any initial interrupts  */
+		ret = i2c_smbus_write_byte(chip->client,
+			TSL2X7X_CMD_REG | TSL2X7X_CMD_SPL_FN |
+			TSL2X7X_CMD_PROXALS_INT_CLR);
+		if (ret < 0) {
+			dev_err(&chip->client->dev,
+				"%s: failed in tsl2x7x_chip_on\n",
+				__func__);
+		return ret;
+		}
+	}
+
+	return ret;
+}
+
+static int tsl2x7x_chip_off(struct iio_dev *indio_dev)
+{
+	int ret;
+	struct tsl2X7X_chip *chip = iio_priv(indio_dev);
+
+	/* turn device off */
+	chip->tsl2x7x_chip_status = TSL2X7X_CHIP_SUSPENDED;
+
+	ret = i2c_smbus_write_byte_data(chip->client,
+		TSL2X7X_CMD_REG | TSL2X7X_CNTRL, 0x00);
+
+	if (chip->pdata && chip->pdata->power_off)
+		chip->pdata->power_off(chip->client);
+
+	return ret;
+}
+
+/*
+ * Proximity calibration helper function
+ * runs through a collection of data samples,
+ * sets the min, max, mean, and std dev.
+ */
+static
+void tsl2x7x_prox_calculate(u16 *data, int length, struct prox_stat
*statP)
+{
+	int i;
+	int sample_min, sample_max, sample_sum, sample_mean;
+	unsigned long stddev;
+	int tmp;
+
+	if (length == 0)
+		length = 1;
+
+	sample_sum = 0;
+	sample_min = INT_MAX;
+	sample_max = INT_MIN;
+	for (i = 0; i < length; i++) {
+		sample_sum += data[i];
+		if (data[i] < sample_min)
+			sample_min = data[i];
+		if (data[i] > sample_max)
+			sample_max = data[i];
+	}
+	sample_mean = sample_sum/length;
+	statP->min = sample_min;
+	statP->max = sample_max;
+	statP->mean = sample_mean;
+
+	sample_sum = 0;
+	for (i = 0; i < length; i++) {
+		tmp = data[i]-sample_mean;
+		sample_sum += tmp * tmp;
+	}
+	stddev = int_sqrt((long)sample_sum)/length;
+	statP->stddev = stddev;
+}
+
+/**
+ * Proximity calibration - collects a number of samples,
+ * calculates a standard deviation based on the samples, and
+ * sets the threshold accordingly.
+ */
+static void tsl2x7x_prox_cal(struct iio_dev *indio_dev)
+{
+	u16 prox_history[MAX_SAMPLES_CAL + 1];
+	int i;
+	struct prox_stat prox_stat_data[2];
+	struct prox_stat *calP;
+	struct tsl2X7X_chip *chip = iio_priv(indio_dev);
+	u8 tmp_irq_settings;
+	u8 current_state = chip->tsl2x7x_chip_status;
+
+	if (chip->tsl2x7x_settings.prox_max_samples_cal > MAX_SAMPLES_CAL) {
+		dev_err(&chip->client->dev,
+			"%s: max prox samples cal is too big: %d\n",
+			__func__, chip->tsl2x7x_settings.prox_max_samples_cal);
+		chip->tsl2x7x_settings.prox_max_samples_cal = MAX_SAMPLES_CAL;
+	}
+
+	/* have to stop to change settings */
+	tsl2x7x_chip_off(indio_dev);
+
+	/* Enable proximity detection save just in case prox not wanted yet*/
+	tmp_irq_settings = chip->tsl2x7x_settings.interrupts_en;
+	chip->tsl2x7x_settings.interrupts_en |= TSL2X7X_CNTL_PROX_INT_ENBL;
+
+	/*turn on device if not already on*/
+	tsl2x7x_chip_on(indio_dev);
+
+	/*gather the samples*/
+	for (i = 0; i < chip->tsl2x7x_settings.prox_max_samples_cal; i++) {
+		mdelay(15);
+		tsl2x7x_prox_poll(indio_dev);
+		prox_history[i] = chip->prox_data;
+		dev_info(&chip->client->dev, "2 i=%d prox data= %d\n",
+			i, chip->prox_data);
+	}
+
+	tsl2x7x_chip_off(indio_dev);
+	calP = &prox_stat_data[PROX_STAT_CAL];
+	tsl2x7x_prox_calculate(prox_history,
+		chip->tsl2x7x_settings.prox_max_samples_cal, calP);
+	chip->tsl2x7x_settings.prox_thres_high = (calP->max << 1) - calP->mean;
+
+	dev_info(&chip->client->dev, " cal min=%d mean=%d max=%d\n",
+		calP->min, calP->mean, calP->max);
+	dev_info(&chip->client->dev,
+		"%s proximity threshold set to %d\n",
+		chip->client->name, chip->tsl2x7x_settings.prox_thres_high);
+
+	/* back to the way they were */
+	chip->tsl2x7x_settings.interrupts_en = tmp_irq_settings;
+	if (current_state == TSL2X7X_CHIP_WORKING)
+		tsl2x7x_chip_on(indio_dev);
+}
+
+static ssize_t tsl2x7x_power_state_show(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct tsl2X7X_chip *chip = iio_priv(indio_dev);
+
+	return snprintf(buf, PAGE_SIZE, "%d\n", chip->tsl2x7x_chip_status);
+}
+
+static ssize_t tsl2x7x_power_state_store(struct device *dev,
+	struct device_attribute *attr, const char *buf, size_t len)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	bool value;
+
+	if (strtobool(buf, &value))
+		return -EINVAL;
+
+	if (!value)
+		tsl2x7x_chip_off(indio_dev);
+	else
+		tsl2x7x_chip_on(indio_dev);
+
+	return len;
+}
+
+static ssize_t tsl2x7x_gain_available_show(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct tsl2X7X_chip *chip = iio_priv(indio_dev);
+
+	if (chip->id > tsl2771)
+		return snprintf(buf, PAGE_SIZE, "%s\n", "1 8 16 128");
+	else
+		return snprintf(buf, PAGE_SIZE, "%s\n", "1 8 16 120");
+}
+
+static ssize_t tsl2x7x_prox_gain_available_show(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+		return snprintf(buf, PAGE_SIZE, "%s\n", "1 2 4 8");
+}
+
+static ssize_t tsl2x7x_als_time_show(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct tsl2X7X_chip *chip = iio_priv(indio_dev);
+
+	return snprintf(buf, PAGE_SIZE, "%d\n",
+			chip->tsl2x7x_settings.als_time);
+}
+
+static ssize_t tsl2x7x_als_time_store(struct device *dev,
+	struct device_attribute *attr, const char *buf, size_t len)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct tsl2X7X_chip *chip = iio_priv(indio_dev);
+	unsigned long value;
+
+	if (kstrtoul(buf, 0, &value))
+		return -EINVAL;
+
+	if ((value < 50) || (value > 650))
+		return -EINVAL;
+
+	if (value % 50)
+		return -EINVAL;
+
+	 chip->tsl2x7x_settings.als_time = value;
+
+	return len;
+}
+
+static IIO_CONST_ATTR(illuminance0_integration_time_available,
+		"50 100 150 200 250 300 350 400 450 500 550 600 650");
+
+static ssize_t tsl2x7x_als_cal_target_show(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct tsl2X7X_chip *chip = iio_priv(indio_dev);
+
+	return snprintf(buf, PAGE_SIZE, "%d\n",
+			chip->tsl2x7x_settings.als_cal_target);
+}
+
+static ssize_t tsl2x7x_als_cal_target_store(struct device *dev,
+	struct device_attribute *attr, const char *buf, size_t len)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct tsl2X7X_chip *chip = iio_priv(indio_dev);
+	unsigned long value;
+
+	if (kstrtoul(buf, 0, &value))
+		return -EINVAL;
+
+	if (value)
+		chip->tsl2x7x_settings.als_cal_target = value;
+
+	return len;
+}
+
+/* sampling_frequency AKA persistence in data sheet */
+static ssize_t tsl2x7x_persistence_show(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct tsl2X7X_chip *chip = iio_priv(indio_dev);
+
+	return snprintf(buf, PAGE_SIZE, "%d\n",
+			chip->tsl2x7x_settings.persistence);
+}
+
+static ssize_t tsl2x7x_persistence_store(struct device *dev,
+	struct device_attribute *attr, const char *buf, size_t len)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct tsl2X7X_chip *chip = iio_priv(indio_dev);
+	unsigned long value;
+
+	if (kstrtoul(buf, 0, &value))
+		return -EINVAL;
+
+	chip->tsl2x7x_settings.persistence = value;
+
+	return len;
+}
+
+static IIO_CONST_ATTR(sampling_frequency_available,
+		"0x00 - 0xFF (0 - 255)");
+
+static ssize_t tsl2x7x_do_calibrate(struct device *dev,
+	struct device_attribute *attr, const char *buf, size_t len)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	bool value;
+
+	if (strtobool(buf, &value))
+		return -EINVAL;
+
+	if (value)
+		tsl2x7x_als_calibrate(indio_dev);
+
+	return len;
+}
+
+static ssize_t tsl2x7x_luxtable_show(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct tsl2X7X_chip *chip = iio_priv(indio_dev);
+	int i = 0;
+	int offset = 0;
+
+	while (i < (TSL2X7X_MAX_LUX_TABLE_SIZE * 3)) {
+		offset += snprintf(buf + offset, PAGE_SIZE, "%d,%d,%d,",
+			chip->tsl2x7x_device_lux[i].ratio,
+			chip->tsl2x7x_device_lux[i].ch0,
+			chip->tsl2x7x_device_lux[i].ch1);
+		if (chip->tsl2x7x_device_lux[i].ratio == 0) {
+			/* We just printed the first "0" entry.
+			 * Now get rid of the extra "," and break. */
+			offset--;
+			break;
+		}
+		i++;
+	}
+
+	offset += snprintf(buf + offset, PAGE_SIZE, "\n");
+	return offset;
+}
+
+static ssize_t tsl2x7x_luxtable_store(struct device *dev,
+	struct device_attribute *attr, const char *buf, size_t len)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct tsl2X7X_chip *chip = iio_priv(indio_dev);
+	int value[ARRAY_SIZE(chip->tsl2x7x_device_lux)*3 + 1];
+	int n;
+
+	get_options(buf, ARRAY_SIZE(value), value);
+
+	/* We now have an array of ints starting at value[1], and
+	 * enumerated by value[0].
+	 * We expect each group of three ints is one table entry,
+	 * and the last table entry is all 0.
+	 */
+	n = value[0];
+	if ((n % 3) || n < 6 ||
+			n > ((ARRAY_SIZE(chip->tsl2x7x_device_lux) - 1) * 3)) {
+		dev_info(dev, "LUX TABLE INPUT ERROR 1 Value[0]=%d\n", n);
+		return -EINVAL;
+	}
+
+	if ((value[(n - 2)] | value[(n - 1)] | value[n]) != 0) {
+		dev_info(dev, "LUX TABLE INPUT ERROR 2 Value[0]=%d\n", n);
+		return -EINVAL;
+	}
+
+	if (chip->tsl2x7x_chip_status == TSL2X7X_CHIP_WORKING)
+		tsl2x7x_chip_off(indio_dev);
+
+	/* Zero out the table */
+	memset(chip->tsl2x7x_device_lux, 0, sizeof(chip->tsl2x7x_device_lux));
+	memcpy(chip->tsl2x7x_device_lux, &value[1], (value[0] * 4));
+
+	return len;
+}
+
+static ssize_t tsl2x7x_do_prox_calibrate(struct device *dev,
+	struct device_attribute *attr, const char *buf, size_t len)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	bool value;
+
+	if (strtobool(buf, &value))
+		return -EINVAL;
+
+	if (value)
+		tsl2x7x_prox_cal(indio_dev);
+
+	return len;
+}
+
+static int tsl2x7x_read_interrupt_config(struct iio_dev *indio_dev,
+					 u64 event_code)
+{
+	struct tsl2X7X_chip *chip = iio_priv(indio_dev);
+	int ret;
+
+	if (IIO_EVENT_CODE_EXTRACT_CHAN_TYPE(event_code) == IIO_INTENSITY)
+		ret = !!(chip->tsl2x7x_settings.interrupts_en & 0x10);
+	else
+		ret = !!(chip->tsl2x7x_settings.interrupts_en & 0x20);
+
+	return ret;
+}
+
+static int tsl2x7x_write_interrupt_config(struct iio_dev *indio_dev,
+					  u64 event_code,
+					  int val)
+{
+	struct tsl2X7X_chip *chip = iio_priv(indio_dev);
+
+	if (IIO_EVENT_CODE_EXTRACT_CHAN_TYPE(event_code) == IIO_INTENSITY) {
+		if (val)
+			chip->tsl2x7x_settings.interrupts_en |= 0x10;
+		else
+			chip->tsl2x7x_settings.interrupts_en &= 0x20;
+	} else {
+		if (val)
+			chip->tsl2x7x_settings.interrupts_en |= 0x20;
+		else
+			chip->tsl2x7x_settings.interrupts_en &= 0x10;
+	}
+
+	return 0;
+}
+
+static int tsl2x7x_write_thresh(struct iio_dev *indio_dev,
+				  u64 event_code,
+				  int val)
+{
+	struct tsl2X7X_chip *chip = iio_priv(indio_dev);
+
+	if (IIO_EVENT_CODE_EXTRACT_CHAN_TYPE(event_code) == IIO_INTENSITY) {
+		switch (IIO_EVENT_CODE_EXTRACT_DIR(event_code)) {
+		case IIO_EV_DIR_RISING:
+			chip->tsl2x7x_settings.als_thresh_high = val;
+			break;
+		case IIO_EV_DIR_FALLING:
+			chip->tsl2x7x_settings.als_thresh_low = val;
+			break;
+		default:
+			return -EINVAL;
+		}
+	} else {
+		switch (IIO_EVENT_CODE_EXTRACT_DIR(event_code)) {
+		case IIO_EV_DIR_RISING:
+			chip->tsl2x7x_settings.prox_thres_high = val;
+			break;
+		case IIO_EV_DIR_FALLING:
+			chip->tsl2x7x_settings.prox_thres_low = val;
+			break;
+		default:
+			return -EINVAL;
+		}
+	}
+
+	return 0;
+}
+
+static int tsl2x7x_read_thresh(struct iio_dev *indio_dev,
+			       u64 event_code,
+			       int *val)
+{
+	struct tsl2X7X_chip *chip = iio_priv(indio_dev);
+
+	if (IIO_EVENT_CODE_EXTRACT_CHAN_TYPE(event_code) == IIO_INTENSITY) {
+		switch (IIO_EVENT_CODE_EXTRACT_DIR(event_code)) {
+		case IIO_EV_DIR_RISING:
+			*val = chip->tsl2x7x_settings.als_thresh_high;
+			break;
+		case IIO_EV_DIR_FALLING:
+			*val = chip->tsl2x7x_settings.als_thresh_low;
+			break;
+		default:
+			return -EINVAL;
+		}
+	} else {
+		switch (IIO_EVENT_CODE_EXTRACT_DIR(event_code)) {
+		case IIO_EV_DIR_RISING:
+			*val = chip->tsl2x7x_settings.prox_thres_high;
+			break;
+		case IIO_EV_DIR_FALLING:
+			*val = chip->tsl2x7x_settings.prox_thres_low;
+			break;
+		default:
+			return -EINVAL;
+		}
+	}
+
+	return 0;
+}
+
+static int tsl2x7x_read_raw(struct iio_dev *indio_dev,
+			    struct iio_chan_spec const *chan,
+			    int *val,
+			    int *val2,
+			    long mask)
+{
+	int ret = -EINVAL;
+	struct tsl2X7X_chip *chip = iio_priv(indio_dev);
+
+	switch (mask) {
+	case 0:
+		switch (chan->type) {
+		case IIO_LIGHT:
+			tsl2x7x_get_lux(indio_dev);
+			*val = chip->als_cur_info.lux;
+			ret = IIO_VAL_INT;
+			break;
+		case IIO_INTENSITY:
+			tsl2x7x_get_lux(indio_dev);
+			if (chan->channel == 0)
+				*val = chip->als_cur_info.als_ch0;
+			else
+				*val = chip->als_cur_info.als_ch1;
+			ret = IIO_VAL_INT;
+			break;
+		case IIO_PROXIMITY:
+			tsl2x7x_prox_poll(indio_dev);
+			*val = chip->prox_data;
+			ret = IIO_VAL_INT;
+			break;
+		default:
+			return -EINVAL;
+			break;
+		}
+		break;
+	case IIO_CHAN_INFO_CALIBSCALE:
+		if (chan->type == IIO_LIGHT)
+			*val =
+			tsl2X7X_als_gainadj[chip->tsl2x7x_settings.als_gain];
+		else
+			*val =
+			tsl2X7X_prx_gainadj[chip->tsl2x7x_settings.prox_gain];
+		ret = IIO_VAL_INT;
+		break;
+	case IIO_CHAN_INFO_CALIBBIAS:
+		*val = chip->tsl2x7x_settings.als_gain_trim;
+		ret = IIO_VAL_INT;
+		break;
+
+	default:
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+static int tsl2x7x_write_raw(struct iio_dev *indio_dev,
+			       struct iio_chan_spec const *chan,
+			       int val,
+			       int val2,
+			       long mask)
+{
+	struct tsl2X7X_chip *chip = iio_priv(indio_dev);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_CALIBSCALE:
+		if (chan->type == IIO_INTENSITY) {
+			switch (val) {
+			case 1:
+				chip->tsl2x7x_settings.als_gain = 0;
+				break;
+			case 8:
+				chip->tsl2x7x_settings.als_gain = 1;
+				break;
+			case 16:
+				chip->tsl2x7x_settings.als_gain = 2;
+				break;
+			case 120:
+				if (chip->id > tsl2771)
+					return -EINVAL;
+				chip->tsl2x7x_settings.als_gain = 3;
+				break;
+			case 128:
+				if (chip->id < tsl2572)
+					return -EINVAL;
+				chip->tsl2x7x_settings.als_gain = 3;
+				break;
+			default:
+				return -EINVAL;
+			}
+		} else {
+			switch (val) {
+			case 1:
+				chip->tsl2x7x_settings.prox_gain = 0;
+				break;
+			case 2:
+				chip->tsl2x7x_settings.prox_gain = 1;
+				break;
+			case 4:
+				chip->tsl2x7x_settings.prox_gain = 2;
+				break;
+			case 8:
+				chip->tsl2x7x_settings.prox_gain = 3;
+				break;
+			default:
+				return -EINVAL;
+			}
+		}
+		break;
+	case IIO_CHAN_INFO_CALIBBIAS:
+		chip->tsl2x7x_settings.als_gain_trim = val;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static DEVICE_ATTR(power_state, S_IRUGO | S_IWUSR,
+		tsl2x7x_power_state_show, tsl2x7x_power_state_store);
+
+static DEVICE_ATTR(proximity_calibscale_available, S_IRUGO,
+		tsl2x7x_prox_gain_available_show, NULL);
+
+static DEVICE_ATTR(illuminance0_calibscale_available, S_IRUGO,
+		tsl2x7x_gain_available_show, NULL);
+
+static DEVICE_ATTR(illuminance0_integration_time, S_IRUGO | S_IWUSR,
+		tsl2x7x_als_time_show, tsl2x7x_als_time_store);
+
+static DEVICE_ATTR(illuminance0_target_input, S_IRUGO | S_IWUSR,
+		tsl2x7x_als_cal_target_show, tsl2x7x_als_cal_target_store);
+
+static DEVICE_ATTR(illuminance0_calibrate, S_IWUSR, NULL,
+		tsl2x7x_do_calibrate);
+
+static DEVICE_ATTR(proximity_calibrate, S_IWUSR, NULL,
+		tsl2x7x_do_prox_calibrate);
+
+static DEVICE_ATTR(illuminance0_lux_table, S_IRUGO | S_IWUSR,
+		tsl2x7x_luxtable_show, tsl2x7x_luxtable_store);
+
+static DEVICE_ATTR(sampling_frequency, S_IRUGO | S_IWUSR,
+		tsl2x7x_persistence_show, tsl2x7x_persistence_store);
+
+/* Use the default register values to identify the Taos device */
+static int tsl2x7x_device_id(unsigned char *id, int target)
+{
+	switch (target) {
+	case tsl2571:
+	case tsl2671:
+	case tsl2771:
+		return ((*id & 0xf0) == TRITON_ID);
+	break;
+	case tmd2671:
+	case tmd2771:
+		return ((*id & 0xf0) == HALIBUT_ID);
+	break;
+	case tsl2572:
+	case tsl2672:
+	case tmd2672:
+	case tsl2772:
+	case tmd2772:
+		return ((*id & 0xf0) == SWORDFISH_ID);
+	break;
+	}
+
+	return -EINVAL;
+}
+
+/*
+ * Interrupt Event Handler */
+static irqreturn_t tsl2x7x_event_handler(int irq, void *private)
+{
+	struct iio_dev *indio_dev = private;
+	struct tsl2X7X_chip *chip = iio_priv(indio_dev);
+	s64 timestamp = iio_get_time_ns();
+	int ret;
+	int value;
+
+	value = i2c_smbus_read_byte_data(chip->client,
+		TSL2X7X_CMD_REG | TSL2X7X_STATUS);
+
+	/* What type of interrupt do we need to process */
+	if (value & TSL2X7X_STA_PRX_INTR) {
+		tsl2x7x_prox_poll(indio_dev);
+		iio_push_event(indio_dev,
+			       IIO_UNMOD_EVENT_CODE(IIO_PROXIMITY,
+						    0,
+						    IIO_EV_TYPE_THRESH,
+						    IIO_EV_DIR_EITHER),
+						    timestamp);
+	}
+
+	if (value & TSL2X7X_STA_ALS_INTR) {
+		tsl2x7x_get_lux(indio_dev);
+		iio_push_event(indio_dev,
+		       IIO_UNMOD_EVENT_CODE(IIO_LIGHT,
+					    0,
+					    IIO_EV_TYPE_THRESH,
+					    IIO_EV_DIR_EITHER),
+					    timestamp);
+	}
+	/* Clear interrupt now that we have handled it. */
+	ret = i2c_smbus_write_byte(chip->client,
+		TSL2X7X_CMD_REG | TSL2X7X_CMD_SPL_FN |
+		TSL2X7X_CMD_PROXALS_INT_CLR);
+	if (ret < 0)
+		dev_err(&chip->client->dev,
+			"%s: Failed to clear irq from event handler. err = %d\n",
+			__func__, ret);
+
+	return IRQ_HANDLED;
+}
+
+static struct attribute *tsl2x7x_ALS_device_attrs[] = {
+	&dev_attr_power_state.attr,
+	&dev_attr_illuminance0_calibscale_available.attr,
+	&dev_attr_illuminance0_integration_time.attr,
+	&iio_const_attr_illuminance0_integration_time_available.dev_attr.attr,
+	&dev_attr_illuminance0_target_input.attr,
+	&dev_attr_illuminance0_calibrate.attr,
+	&dev_attr_illuminance0_lux_table.attr,
+	&dev_attr_sampling_frequency.attr,
+	&iio_const_attr_sampling_frequency_available.dev_attr.attr,
+	NULL
+};
+
+static struct attribute *tsl2x7x_PRX_device_attrs[] = {
+	&dev_attr_power_state.attr,
+	&dev_attr_sampling_frequency.attr,
+	&iio_const_attr_sampling_frequency_available.dev_attr.attr,
+	&dev_attr_proximity_calibrate.attr,
+	NULL
+};
+
+static struct attribute *tsl2x7x_ALSPRX_device_attrs[] = {
+	&dev_attr_power_state.attr,
+	&dev_attr_illuminance0_calibscale_available.attr,
+	&dev_attr_illuminance0_integration_time.attr,
+	&iio_const_attr_illuminance0_integration_time_available.dev_attr.attr,
+	&dev_attr_illuminance0_target_input.attr,
+	&dev_attr_illuminance0_calibrate.attr,
+	&dev_attr_illuminance0_lux_table.attr,
+	&dev_attr_sampling_frequency.attr,
+	&iio_const_attr_sampling_frequency_available.dev_attr.attr,
+	&dev_attr_proximity_calibrate.attr,
+	NULL
+};
+
+static struct attribute *tsl2x7x_PRX2_device_attrs[] = {
+	&dev_attr_power_state.attr,
+	&dev_attr_sampling_frequency.attr,
+	&iio_const_attr_sampling_frequency_available.dev_attr.attr,
+	&dev_attr_proximity_calibrate.attr,
+	&dev_attr_proximity_calibscale_available.attr,
+	NULL
+};
+
+static struct attribute *tsl2x7x_ALSPRX2_device_attrs[] = {
+	&dev_attr_power_state.attr,
+	&dev_attr_illuminance0_calibscale_available.attr,
+	&dev_attr_illuminance0_integration_time.attr,
+	&iio_const_attr_illuminance0_integration_time_available.dev_attr.attr,
+	&dev_attr_illuminance0_target_input.attr,
+	&dev_attr_illuminance0_calibrate.attr,
+	&dev_attr_illuminance0_lux_table.attr,
+	&dev_attr_sampling_frequency.attr,
+	&iio_const_attr_sampling_frequency_available.dev_attr.attr,
+	&dev_attr_proximity_calibrate.attr,
+	&dev_attr_proximity_calibscale_available.attr,
+	NULL
+};
+
+static const struct attribute_group tsl2X7X_device_attr_group_tbl[] = {
+	[ALS] = {
+		.attrs = tsl2x7x_ALS_device_attrs,
+	},
+	[PRX] = {
+		.attrs = tsl2x7x_PRX_device_attrs,
+	},
+	[ALSPRX] = {
+		.attrs = tsl2x7x_ALSPRX_device_attrs,
+	},
+	[PRX2] = {
+		.attrs = tsl2x7x_PRX2_device_attrs,
+	},
+	[ALSPRX2] = {
+		.attrs = tsl2x7x_ALSPRX2_device_attrs,
+	},
+};
+
+static const struct iio_info tsl2X7X_device_info[] = {
+	[ALS] = {
+		.attrs = &tsl2X7X_device_attr_group_tbl[ALS],
+		.driver_module = THIS_MODULE,
+		.read_raw = &tsl2x7x_read_raw,
+		.write_raw = &tsl2x7x_write_raw,
+		.read_event_value = &tsl2x7x_read_thresh,
+		.write_event_value = &tsl2x7x_write_thresh,
+		.read_event_config = &tsl2x7x_read_interrupt_config,
+		.write_event_config = &tsl2x7x_write_interrupt_config,
+	},
+	[PRX] = {
+		.attrs = &tsl2X7X_device_attr_group_tbl[PRX],
+		.driver_module = THIS_MODULE,
+		.read_raw = &tsl2x7x_read_raw,
+		.write_raw = &tsl2x7x_write_raw,
+		.read_event_value = &tsl2x7x_read_thresh,
+		.write_event_value = &tsl2x7x_write_thresh,
+		.read_event_config = &tsl2x7x_read_interrupt_config,
+		.write_event_config = &tsl2x7x_write_interrupt_config,
+	},
+	[ALSPRX] = {
+		.attrs = &tsl2X7X_device_attr_group_tbl[ALSPRX],
+		.driver_module = THIS_MODULE,
+		.read_raw = &tsl2x7x_read_raw,
+		.write_raw = &tsl2x7x_write_raw,
+		.read_event_value = &tsl2x7x_read_thresh,
+		.write_event_value = &tsl2x7x_write_thresh,
+		.read_event_config = &tsl2x7x_read_interrupt_config,
+		.write_event_config = &tsl2x7x_write_interrupt_config,
+	},
+	[PRX2] = {
+		.attrs = &tsl2X7X_device_attr_group_tbl[PRX2],
+		.driver_module = THIS_MODULE,
+		.read_raw = &tsl2x7x_read_raw,
+		.write_raw = &tsl2x7x_write_raw,
+		.read_event_value = &tsl2x7x_read_thresh,
+		.write_event_value = &tsl2x7x_write_thresh,
+		.read_event_config = &tsl2x7x_read_interrupt_config,
+		.write_event_config = &tsl2x7x_write_interrupt_config,
+	},
+	[ALSPRX2] = {
+		.attrs = &tsl2X7X_device_attr_group_tbl[ALSPRX2],
+		.driver_module = THIS_MODULE,
+		.read_raw = &tsl2x7x_read_raw,
+		.write_raw = &tsl2x7x_write_raw,
+		.read_event_value = &tsl2x7x_read_thresh,
+		.write_event_value = &tsl2x7x_write_thresh,
+		.read_event_config = &tsl2x7x_read_interrupt_config,
+		.write_event_config = &tsl2x7x_write_interrupt_config,
+	},
+};
+
+static const struct tsl2x7x_chip_info tsl2x7x_chip_info_tbl[] = {
+	[ALS] = {
+		.channel = {
+			{
+			.type = IIO_LIGHT,
+			.indexed = 1,
+			.channel = 0,
+			.processed_val = 1,
+			}, {
+			.type = IIO_INTENSITY,
+			.indexed = 1,
+			.channel = 0,
+			.info_mask = IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT |
+				IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT,
+			.event_mask = TSL2X7X_EVENT_MASK
+			}, {
+			.type = IIO_INTENSITY,
+			.indexed = 1,
+			.channel = 1,
+			},
+		},
+	.chan_table_elements = 3,
+	.info = &tsl2X7X_device_info[ALS],
+	},
+	[PRX] = {
+		.channel = {
+			{
+			.type = IIO_PROXIMITY,
+			.indexed = 1,
+			.channel = 0,
+			.event_mask = TSL2X7X_EVENT_MASK
+			},
+		},
+	.chan_table_elements = 1,
+	.info = &tsl2X7X_device_info[PRX],
+	},
+	[ALSPRX] = {
+		.channel = {
+			{
+			.type = IIO_LIGHT,
+			.indexed = 1,
+			.channel = 0,
+			.processed_val = 1,
+			}, {
+			.type = IIO_INTENSITY,
+			.indexed = 1,
+			.channel = 0,
+			.info_mask = IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT |
+				IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT,
+			.event_mask = TSL2X7X_EVENT_MASK
+			}, {
+			.type = IIO_INTENSITY,
+			.indexed = 1,
+			.channel = 1,
+			}, {
+			.type = IIO_PROXIMITY,
+			.indexed = 1,
+			.channel = 0,
+			.event_mask = TSL2X7X_EVENT_MASK
+			},
+		},
+	.chan_table_elements = 4,
+	.info = &tsl2X7X_device_info[ALSPRX],
+	},
+	[PRX2] = {
+		.channel = {
+			{
+			.type = IIO_PROXIMITY,
+			.indexed = 1,
+			.channel = 0,
+			.info_mask =
+				IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT,
+			.event_mask = TSL2X7X_EVENT_MASK
+			},
+		},
+	.chan_table_elements = 1,
+	.info = &tsl2X7X_device_info[PRX2],
+	},
+	[ALSPRX2] = {
+		.channel = {
+			{
+			.type = IIO_LIGHT,
+			.indexed = 1,
+			.channel = 0,
+			.processed_val = 1,
+			}, {
+			.type = IIO_INTENSITY,
+			.indexed = 1,
+			.channel = 0,
+			.info_mask = IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT |
+				IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT,
+			.event_mask = TSL2X7X_EVENT_MASK
+			}, {
+			.type = IIO_INTENSITY,
+			.indexed = 1,
+			.channel = 1,
+			}, {
+			.type = IIO_PROXIMITY,
+			.indexed = 1,
+			.channel = 0,
+			.info_mask =
+				IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT,
+			.event_mask = TSL2X7X_EVENT_MASK
+			},
+		},
+	.chan_table_elements = 4,
+	.info = &tsl2X7X_device_info[ALSPRX2],
+	},
+};
+
+/*
+ * Client probe function.
+ */
+static int __devinit tsl2x7x_probe(struct i2c_client *clientp,
+	const struct i2c_device_id *id)
+{
+	int ret;
+	unsigned char device_id;
+	struct iio_dev *indio_dev;
+	struct tsl2X7X_chip *chip;
+
+	indio_dev = iio_allocate_device(sizeof(*chip));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	chip = iio_priv(indio_dev);
+	chip->client = clientp;
+	i2c_set_clientdata(clientp, indio_dev);
+
+	ret = tsl2x7x_i2c_read(chip->client,
+		TSL2X7X_CHIPID, &device_id);
+	if (ret < 0)
+		goto fail1;
+
+	if ((!tsl2x7x_device_id(&device_id, id->driver_data)) ||
+		(tsl2x7x_device_id(&device_id, id->driver_data) == -EINVAL)) {
+		dev_info(&chip->client->dev,
+				"i2c device found does not match expected id in %s\n",
+				__func__);
+		goto fail1;
+	}
+
+	ret = i2c_smbus_write_byte(clientp, (TSL2X7X_CMD_REG | TSL2X7X_CNTRL));
+	if (ret < 0) {
+		dev_err(&clientp->dev, "%s: write to cmd reg failed. err = %d\n",
+				__func__, ret);
+		goto fail1;
+	}
+
+	/* ALS and PROX functions can be invoked via user space poll
+	 * or H/W interrupt. If busy return last sample. */
+	mutex_init(&chip->als_mutex);
+	mutex_init(&chip->prox_mutex);
+
+	chip->tsl2x7x_chip_status = TSL2X7X_CHIP_UNKNOWN;
+	chip->pdata = clientp->dev.platform_data;
+	chip->id = id->driver_data;
+	chip->chip_info =
+		&tsl2x7x_chip_info_tbl[device_channel_config[id->driver_data]];
+
+	indio_dev->info = chip->chip_info->info;
+	indio_dev->dev.parent = &clientp->dev;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->name = chip->client->name;
+	indio_dev->channels = chip->chip_info->channel;
+	indio_dev->num_channels = chip->chip_info->chan_table_elements;
+
+	if (clientp->irq) {
+		ret = request_threaded_irq(clientp->irq,
+					   NULL,
+					   &tsl2x7x_event_handler,
+					   IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+					   "TSL2X7X_event",
+					   indio_dev);
+		if (ret) {
+			dev_err(&clientp->dev,
+				"%s: irq request failed", __func__);
+			goto fail2;
+		}
+	}
+
+	/* Load up the defaults */
+	tsl2x7x_defaults(chip);
+	/* Make sure the chip is on */
+	tsl2x7x_chip_on(indio_dev);
+
+	ret = iio_device_register(indio_dev);
+	if (ret) {
+		dev_err(&clientp->dev,
+			"%s: iio registration failed\n", __func__);
+		goto fail1;
+	}
+
+	dev_info(&clientp->dev, "%s Light sensor found.\n", id->name);
+	return 0;
+
+fail1:
+	if (clientp->irq)
+		free_irq(clientp->irq, indio_dev);
+fail2:
+	iio_free_device(indio_dev);
+	return ret;
+}
+
+static int tsl2x7x_suspend(struct device *dev)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct tsl2X7X_chip *chip = iio_priv(indio_dev);
+	int ret = 0;
+
+	if (chip->tsl2x7x_chip_status == TSL2X7X_CHIP_WORKING) {
+		ret = tsl2x7x_chip_off(indio_dev);
+		chip->tsl2x7x_chip_status = TSL2X7X_CHIP_SUSPENDED;
+	}
+
+	if (chip->pdata && chip->pdata->platform_power) {
+		pm_message_t pmm = {PM_EVENT_SUSPEND};
+		chip->pdata->platform_power(dev, pmm);
+	}
+
+	return ret;
+}
+
+static int tsl2x7x_resume(struct device *dev)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct tsl2X7X_chip *chip = iio_priv(indio_dev);
+	int ret = 0;
+
+	if (chip->pdata && chip->pdata->platform_power) {
+		pm_message_t pmm = {PM_EVENT_RESUME};
+		chip->pdata->platform_power(dev, pmm);
+	}
+
+	if (chip->tsl2x7x_chip_status == TSL2X7X_CHIP_SUSPENDED)
+		ret = tsl2x7x_chip_on(indio_dev);
+
+	return ret;
+}
+
+static int __devexit tsl2x7x_remove(struct i2c_client *client)
+{
+	struct tsl2X7X_chip *chip = i2c_get_clientdata(client);
+	struct iio_dev *indio_dev = iio_priv_to_dev(chip);
+
+	tsl2x7x_chip_off(indio_dev);
+
+	iio_device_unregister(indio_dev);
+	if (client->irq)
+		free_irq(client->irq, chip->client->name);
+
+	iio_free_device(indio_dev);
+
+	return 0;
+}
+
+static struct i2c_device_id tsl2x7x_idtable[] = {
+	{ "tsl2571", tsl2571 },
+	{ "tsl2671", tsl2671 },
+	{ "tmd2671", tmd2671 },
+	{ "tsl2771", tsl2771 },
+	{ "tmd2771", tmd2771 },
+	{ "tsl2572", tsl2572 },
+	{ "tsl2672", tsl2672 },
+	{ "tmd2672", tmd2672 },
+	{ "tsl2772", tsl2772 },
+	{ "tmd2772", tmd2772 },
+	{}
+};
+
+MODULE_DEVICE_TABLE(i2c, tsl2x7x_idtable);
+
+static const struct dev_pm_ops tsl2x7x_pm_ops = {
+	.suspend = tsl2x7x_suspend,
+	.resume  = tsl2x7x_resume,
+};
+
+/* Driver definition */
+static struct i2c_driver tsl2x7x_driver = {
+	.driver = {
+		.name = "tsl2x7x",
+		.pm = &tsl2x7x_pm_ops,
+	},
+	.id_table = tsl2x7x_idtable,
+	.probe = tsl2x7x_probe,
+	.remove = __devexit_p(tsl2x7x_remove),
+};
+
+module_i2c_driver(tsl2x7x_driver);
+
+MODULE_AUTHOR("J. August
Brenner");
+MODULE_DESCRIPTION("TAOS tsl2x7x ambient and proximity light sensor
driver");
+MODULE_LICENSE("GPL");
--
1.7.4.1
 
CD: 7ms