Home
Reading
Searching
Subscribe
Sponsors
Statistics
Posting
Contact
Spam
Lists
Links
About
Hosting
Filtering
Features Download
Marketing
Archives
FAQ
Blog
 
Gmane
From: Mauro Carvalho Chehab <m.chehab <at> samsung.com>
Subject: [PATCH 00/79] Add support for ATSC PCTV 80e USB stick
Newsgroups: gmane.linux.drivers.video-input-infrastructure
Date: Monday 3rd March 2014 10:05:54 UTC (over 3 years ago)
This patch series finally merge a long waited driver, for Micronas/Trident
DRX-J ATSC frontends.

It is based on a previous work from Devin, who made the original port
of the Trident driver and got license to ship the firmware.

Latter, it got some attention from Patrick that tried to upstream it.

However, this driver had very serious issues, and didn't fit into Linux
Kernel code quality standards.

So, I made some patches, back in 2012, in order to try helping to get
this driver merged, but, as I didn't have the device, and Patrick never
sent a final tested version, the patches got hibernated for a long time.

Finally, this year, I got one hardware for me, and one for Shuah, as
she offered her help to fix suspend/resume issues at the subsystem.

This series is a result of this work: the driver got major cleanups,
and several relevant bug fixes. The most serious one is that the
device was not fully initializing the struct that was enabling the
MPEG output. Worse than that, the routine that was setting the MPEG
output was also rewriting the default values for a dirty set.

The type of output was also wrong: on this board, PCTV 80e is wired
for serial MPEG transfer, but the driver was initialized to parallel.

All those bugs got fixed, and, at least on my tests with a PCTV
80e model 01134, the device is now properly working.

Not sure if all patches will arrive the ML, as there are some very big
ones here that could be biger than VGER's max limit for posts. 

Anyway, all patches can be found at:
	http://git.linuxtv.org/mchehab/experimental.git/shortlog/refs/heads/drx-j-v3

Have fun!
Mauro

Devin Heitmueller (2):
  [media] drx-j: add a driver for Trident drx-j frontend
  [media] drx-j: put under 3-clause BSD license

Mauro Carvalho Chehab (74):
  [media] drx-j: CodingStyle fixes
  [media] drx-j: Fix compilation and un-comment it
  [media] drx-j: Fix CodingStyle
  [media] drx-j: get rid of the typedefs on bsp_i2c.h
  [media] drx-j: remove the "const" annotate on HICommand()
  [media] drx-j: get rid of the integer typedefs
  [media] drx-j: get rid of the other typedefs at bsp_types.h
  [media] drx-j: get rid of the bsp*.h headers
  [media] drx-j: get rid of most of the typedefs
  [media] drx-j: fix whitespacing on pointer parmameters
  [media] drx-j: Use checkpatch --fix to solve several issues
  [media] drx-j: Don't use CamelCase
  [media] drx-j: do more CodingStyle fixes
  [media] drx-j: remove the unused tuner_i2c_write_read() function
  [media] drx-j: Remove a bunch of unused but assigned vars
  [media] drx-j: Some minor CodingStyle fixes at headers
  [media] drx-j: make a few functions static
  [media] drx-j: Get rid of drx39xyj/bsp_tuner.h
  [media] drx-j: get rid of typedefs in drx_driver.h
  [media] drx-j: Get rid of typedefs on drxh.h
  [media] drx-j: a few more CodingStyle fixups
  [media] drx-j: Don't use buffer if an error occurs
  [media] drx-j: replace the ugly CHK_ERROR() macro
  [media] drx-j: don't use parenthesis on return
  [media] drx-j: Simplify logic expressions
  [media] drx-j: More CamelCase fixups
  [media] drx-j: Remove typedefs in drxj.c
  [media] drx-j: CodingStyle fixups on drxj.c
  [media] drx-j: Use the Linux error codes
  [media] drx-j: Replace printk's by pr_foo()
  [media] drx-j: get rid of some ugly macros
  [media] drx-j: remove typedefs at drx_driver.c
  [media] drx-j: remove drxj_options.h
  [media] drx-j: make checkpatch.pl happy
  [media] drx-j: remove the useless microcode_size
  [media] drx-j: Fix release and error path on drx39xxj.c
  [media] drx-j: Be sure that all allocated data are properly initialized
  [media] drx-j: dynamically load the firmware
  [media] drx-j: Split firmware size check from the main routine
  [media] em28xx: add support for PCTV 80e remote controller
  [media] drx-j: remove unused code from drx_driver.c
  [media] drx-j: get rid of its own be??_to_cpu() implementation
  [media] drx-j: reset the DVB scan configuration at powerup
  [media] drx-j: Allow standard selection
  [media] drx-j: Some cleanups at drx_driver.c source
  [media] drx-j: prepend function names with drx_ at drx_driver.c
  [media] drx-j: get rid of drx_driver.c
  [media] drx-j: Avoid any regressions by preserving old behavior
  [media] drx-j: Remove duplicated firmware upload code
  [media] drx-j: get rid of drx_ctrl
  [media] drx-j: get rid of the remaining drx generic functions
  [media] drx-j: move drx39xxj into drxj.c
  [media] drx-j: get rid of drxj_ctrl()
  [media] drx-j: comment or remove unused code
  [media] drx-j: remove some ugly bindings from drx39xxj_dummy.c
  [media] drx-j: get rid of tuner dummy get/set frequency
  [media] drx-j: be sure to use tuner's IF
  [media] drx-j: avoid calling power_down_foo twice
  [media] drx-j: call ctrl_set_standard even if a standard is powered
  [media] drx-j: use the proper timeout code on scu_command
  [media] drx-j: remove some unused data
  [media] drx-j: Fix qam/256 mode
  [media] drx-j: Get rid of I2C protocol version
  [media] drx-j: get rid of function prototypes at drx_dap_fasi.c
  [media] drx-j: get rid of drx_dap_fasi.c
  [media] drx-j: get rid of struct drx_dap_fasi_funct_g
  [media] drx-j: get rid of function wrappers
  [media] drx-j: Allow userspace control of LNA
  [media] drx-j: Use single master mode
  [media] drx-j: be sure to send the powerup command at device open
  [media] drx-j: be sure to do a full software reset
  [media] drx-j: disable OOB
  [media] drx-j: Properly initialize mpeg struct before using it
  [media] drx-j: set it to serial mode by default

Shuah Khan (3):
  [media] drx-j: fix pr_dbg undefined compile errors when DJH_DEBUG is
defined
  [media] drx-j: remove return that prevents DJH_DEBUG code to run
  [media] drx-j: fix boot failure due to null pointer dereference

 Documentation/video4linux/CARDLIST.em28xx          |     1 +
 drivers/media/dvb-frontends/Kconfig                |     2 +
 drivers/media/dvb-frontends/Makefile               |     1 +
 drivers/media/dvb-frontends/drx39xyj/Kconfig       |     7 +
 drivers/media/dvb-frontends/drx39xyj/Makefile      |     6 +
 drivers/media/dvb-frontends/drx39xyj/bsp_i2c.h     |   139 +
 drivers/media/dvb-frontends/drx39xyj/drx39xxj.h    |    39 +
 .../media/dvb-frontends/drx39xyj/drx_dap_fasi.h    |   256 +
 drivers/media/dvb-frontends/drx39xyj/drx_driver.h  |  2367 +++
 .../dvb-frontends/drx39xyj/drx_driver_version.h    |    72 +
 drivers/media/dvb-frontends/drx39xyj/drxj.c        | 20867
+++++++++++++++++++
 drivers/media/dvb-frontends/drx39xyj/drxj.h        |   680 +
 drivers/media/dvb-frontends/drx39xyj/drxj_map.h    | 15055 +++++++++++++
 drivers/media/usb/em28xx/Kconfig                   |     1 +
 drivers/media/usb/em28xx/em28xx-cards.c            |    21 +
 drivers/media/usb/em28xx/em28xx-dvb.c              |    27 +
 drivers/media/usb/em28xx/em28xx.h                  |     1 +
 17 files changed, 39542 insertions(+)
 create mode 100644 drivers/media/dvb-frontends/drx39xyj/Kconfig
 create mode 100644 drivers/media/dvb-frontends/drx39xyj/Makefile
 create mode 100644 drivers/media/dvb-frontends/drx39xyj/bsp_i2c.h
 create mode 100644 drivers/media/dvb-frontends/drx39xyj/drx39xxj.h
 create mode 100644 drivers/media/dvb-frontends/drx39xyj/drx_dap_fasi.h
 create mode 100644 drivers/media/dvb-frontends/drx39xyj/drx_driver.h
 create mode 100644
drivers/media/dvb-frontends/drx39xyj/drx_driver_version.h
 create mode 100644 drivers/media/dvb-frontends/drx39xyj/drxj.c
 create mode 100644 drivers/media/dvb-frontends/drx39xyj/drxj.h
 create mode 100644 drivers/media/dvb-frontends/drx39xyj/drxj_map.h

-- 
1.8.5.3
 
CD: 2ms