Dear Sir/Madam,
       
        even if we have an official TLA with Atheros, we cannot have the needed support about few RF Register usage, so we are looking for somebody giving us the needed support.

What support we are looking for the Atheros AR5414
=======================================
The support we need to sombody very well knowing the Atheros chip-set are both related to the RF Registers (not documented):

- Operating in the 802.11a mode, how to move the base systhetized frequency to 4600 or 4700 MHz and how to move to 5500 or 5600 MHz instead of the 4800 MHz default.

- How to change the RF channel stepping from the standard 2.5 and 5 MHz stepping to a  more fine 1 and 2 MHz stepping.

Unfortunately there is no official documentation about and we were not able to guess the correct numbers to write into the RF registers because the structure of the RF Registers is very complex and quite completely not documented!

Any help will be appreciated.

A reward of 5000 USD will be provided to who will be able to give us the two solutions (just the consultancy), otherwise a reward of 2000 USD will be provide to who will give us only one solution.

Please feel free to forward this email to anybody you think may be able to help us directly or indirectly forwarding to others.

Thank you again for your cooperation.
Kind regards,
Andrea

Should you have any question, please do not hesitate to contact us.
Best regards,

Dr. Andrea Tarasconi, Technical Director (CTO).

            Direct phone: +39 0522 9483.22
            Mobile: +39 335 8049677
            E-mail: andrea.tarasconi <at> essentia.it

Essentia S.p.A. – Telecomunicazioni & Sicurezza

Head Quarter: Via G.B. Vico, 29 - 42040 Cella (RE), Italy
Phone: +39 0522 9483.11 - Fax: +39 0522 9483.33
Worldwide Web: www.essentia.it - E-mail: info <at> essentia.it