Home
Reading
Searching
Subscribe
Sponsors
Statistics
Posting
Contact
Spam
Lists
Links
About
Hosting
Filtering
Features Download
Marketing
Archives
FAQ
Blog
 
Gmane
From: SG <SiestaGomez <at> web.de>
Subject: Re: dvb_usb_dib0700 and Remote Control DSR-0112
Newsgroups: gmane.linux.drivers.dvb
Date: Sunday 22nd June 2008 12:01:00 UTC (over 9 years ago)
Hi,

its better to always use directly the
/dev/input/by-path/pci-2-1--event-ir 
device because the event interface could change the next time you plug it
in
or when using another new input device.

The get the remote work you need to apply the attached patch.
Also attached you find a lirc config which works fine here.

Best regards,
Martin


On Sun, 22 Jun 2008 10:35:49 +0200
Lutz Lacher  wrote:

> Hi Tobias,
> 
> > So, sticks IR receiver is reported as /class/input/input21 and you are
> > trying to use irrecord on /dev/input/event9? Does not fit together, you
> > should try irrecord on /dev/input/input21 instead! (just my personal
> > opinion ;)
> >
> i don't have an /dev/input/input21, and if i understood the web page 
> correctly, it's always the same device. It says:
> 
> But Linux systems runing recent udev will automatically create
non-varying 
> names, a nicer and automatic way of providing a stable input event name:
> 
> ls -l /dev/input/by-path on my system
> lrwxrwxrwx 1 root root 9 2008-06-22 09:56 pci-2-1--event-ir -> ../event9
> 
> which disappears if i plug out the stick and reappears if i plug it in
again.
> eg. now it's reported as:
> kernel: input: IR-receiver inside an USB DVB receiver as
/class/input/input11
> 
> Best regards, Lutz
> 
> 
> 
> _______________________________________________
> linux-dvb mailing list
> [email protected]
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
 
CD: 3ms